ADI AD595AQ

Термопарный усилитель-55°C ~ 125°C

Overview

The AD595AQ is a Complete Instrumentation Amplifier with thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a pre-calibrated amplifier to produce a high level (10mV/°C) output directly from a thermocouple signal. Pin-strapping options allow it to be used as a linear amplifier-compensator or as a switched output set-point controller using either fixed or remote set-point control. It can be used to amplify its compensation voltage directly, thereby converting it to a stand-alone Celsius transducer with a low impedance voltage output. It includes a thermocouple failure alarm that indicates if one or both thermocouple leads become open. The alarm output has a flexible format which includes TTL drive capability. It can be powered from a single ended supply (including +5V) and by including a negative supply, temperatures below 0°C can be measured.

Features

• Type J (AD594) pretrimmed or

• Thermocouples of Type K (AD595)

• Type T Thermocouple Inputs are compatible.

• Impedance is low. Voltage 10 mV/8C output

• Ice Point Compensation Built-In

• +5 V to 615 V is a wide power supply range

• Low Power: Typical 1 mW

• Alarm for Thermocouple Failure

Applications

Switching applications