ADI PD42-2-1240-TMCL

Гибридный24 В постоянного тока200

Overview

TRINAMIC's PD42-x-1240 are full mechatronic solutions, made up of a TMCM-1240 stepper control module and a NEMA 17 motor. The PD42-x-1240 allows users to control the module using TRINAMIC Motion Control Language (TMCL™) or CANopen® firmware, making use of TRINAMIC’s TMC5160 motion controller and motor driver. Dynamic current control, and quiet, smooth, and efficient operation are combined with StealthChop™, DcStep™, StallGuard™, and CoolStep™ features.Features: Stepper motor NEMA17 / 42 mm, 0.22 Nm to 0.7 Nm, With controller/driver, Linear and sixPoint™ ramps, +10 VDC to 30 VDC supply voltage, Up to 2 ARMS motor current, RS485, CAN, and USB interface, Integrated SensOstep™ encoder and support for external encoder, S/D interface, Multi-purpose inputs and outputs, Laboratory automation, Manufacturing, Semiconductor handling, Robotics, Factory automation, Test and measurement, Life science, Biotechnology, Liquid handling

Features

PANdrive™ Series
Bulk Package
Hybrid Type
Bipolar Coil Type
24VDC Voltage - Rated
2 A Current Rating (Amps)
200 Steps per Revolution
1.8° Step Angle
±5% Accuracy
50.98 / 360 Torque - Holding (oz-in / mNm)
17 NEMA Frame Size
0.197" (5.00mm) Diameter - Shaft
0.945" (24.00mm) Length - Shaft and Bearing
1.220" (31.00mm) Mounting Hole Spacing
Wire Leads with Connector Termination Style
1.2 Ohms Coil Resistance
Integrated Controller, Flatted Shaft Features