Allegro ACS770KCB-150B-PFF-T

Эффект Холла, открытый контур150A1Ратиометрический, вольтаж

Overview

ACS770ECB-200B-PFF-T with pin details, that includes ACS770 Series, they are designed to operate with a Tube Packaging, Package Case is shown on datasheet note for use in a 5-CB Formed Leads, PFF, that offers Frequency features such as DC ~ 120kHz, it has an Operating Temperature range of -40°C ~ 85°C, as well as the Through Hole Mounting Type, the device can also be used as 10mV/A Sensitivity. In addition, the Number of Channels is 1, the device is offered in 5V Voltage Supply, the device has a Ratiometric, Voltage of Output, and Current Supply Max is 15mA, and the Accuracy is ±0.6%, and Sensor Type is Hall Effect, Open Loop, and the Linearity is ±1%, and Polarization is Bidirectional, and the Response Time is 4.6μs, and For Measuring is AC/DC, and the Current Sensing is 200A.

ACS770ECB-200U-PSF-T with circuit diagram, that includes ±0.6% Accuracy, they are designed to operate with a 200A Current Sensing, Current Supply Max is shown on datasheet note for use in a 15mA, that offers For Measuring features such as DC, Frequency is designed to work in DC ~ 120kHz, as well as the ±1% Linearity, the device can also be used as Through Hole Mounting Type. In addition, the Number of Channels is 1, it has an Operating Temperature range of -40°C ~ 85°C, the device has a Ratiometric, Voltage of Output, and Package Case is 5-CB Formed Leads, PSF, and the Packaging is Tube, and Polarization is Unidirectional, and the Response Time is 4.6μs, and Sensitivity is 20mV/A, and the Sensor Type is Hall Effect, Open Loop, and Series is ACS770, and the Voltage Supply is 5V.

Features

Industry-leading total output accuracy achieved with new piecewise linear digital temperature compensation of offset and sensitivity 

Industry-leading noise performance through a proprietary amplifier and filter design techniques

120 kHz typical bandwidth

4.1 µs output rise time in response to step input current

Small package size, with easy mounting capability

Monolithic Hall IC for high reliability

Ultralow power loss:100 µΩ internal conductor resistance

Galvanic isolation allows use in economical, high-side current sensing in high-voltage systems

4.5 to 5.5 V, single supply operation

Output voltage proportional to AC or DC currents

Factory-trimmed for accuracy

Extremely stable output offset voltage

Applications

Motor control

Load detection and management

Power supply and DC-to-DC converter control

Inverter control

Overcurrent fault detection