Altera EN5365QI

Неизолированный модуль PoL2.375V5.5V0.75 ~ 3.3V6A93%

Overview

The EN5364QI is DC/DC CONVERTER 0.6-6.12V 37W, that includes EnpirionR 5300 Series, they are designed to operate with a Non-Isolated PoL Module Type, Packaging is shown on datasheet note for use in a Digi-ReelR Alternate Packaging, that offers Unit Weight features such as 0.018695 oz, Mounting Style is designed to work in SMD/SMT, as well as the Enpirion Tradename, it has an Operating Temperature Range range of - 40 C to + 85 C. In addition, the Package Case is 68-QFN, it has an Operating Temperature range of -40°C ~ 85°C, the device has a Surface Mount of Mounting Type, and Features is Remote On/Off, OCP, OTP, SCP, UVLO, and the Size Dimension is 0.43" L x 0.31" W x 0.07" H (11.0mm x 8.0mm x 1.9mm), and Applications is ITE (Commercial), and the Number of Outputs is 1, and Topology is Buck, and the Current Output Max is 6A, and Voltage Input Min is 2.375V, and the Voltage Input Max is 6.6V, and Shutdown is Shutdown, and the Voltage Output 1 is 0.6 ~ 6.12 V, and Efficiency is 0.93, it has an Maximum Operating Temperature range of + 85 C, it has an Minimum Operating Temperature range of - 40 C, and the Output Voltage is 0.6 V to 6.12 V, and Operating Supply Current is 250 uA, and the Input Voltage is 2.375 V to 6.6 V, and Input Voltage MAX is 6.6 V, and the Output Current is 6 A, and Switching Frequency is 4 MHz, and the Input Voltage MIN is 2.375 V, and Load Regulation is - 0.04 % / A, and the Supply Voltage Min is 2.375 V.

EN5360DC with circuit diagram manufactured by ENPIRION. The EN5360DC is available in QFN Package, is part of the IC Chips.

Features

• Integrated INDUCTOR, MOSFETS, Controller

• Footprint 1/3rd that of competing solutions.

• Low Part Count: only 3 MLCC Capacitors.

• Up to 20W continuous output power.

• Low output impedance optimized for ≤ 90 nm

• Master/slave configuration for paralleling.

• 5MHz operating frequency.

• High efficiency, up to 93%.

• Wide input voltage range of 2.375V to 5.5V.

• 3-pin VID output voltage select to choose one

of 7 pre-programmed Output Voltages.

• Output enable pin and Power OK signal.

• Programmable soft-start time.

• Optimized for low noise/EMI design.

• Thermal shutdown, over current, short circuit,

over-voltage and under-voltage protection.

• RoHS compliant, MSL level 3, 260C reflow.

Applications

• Point of load regulation for low-power

processors, network processors, DSPs,

FPGAs, and ASICs

• ≤ 90 nm advanced process loads

• Notebook computers, servers, workstations

• Broadband, networking, LAN/WAN, optical

• Low voltage, distributed power architectures

with 2.5V, 3.3V or 5V rails

• DSL, STB, DVR, DTV, Industrial PC

• Ripple sensitive applications