IDT 8N4Q001EG-1052CDI8

Тактовый генератор425 МГц, 212,5 МГц, 106,25 МГц, 159,375 МГц3.135V ~ 3.465V-40°C ~ 85°C10-CLCCПоверхностный монтаж

Overview

The 8N4Q001EG-2194CDI8 is a Quad-Frequency Programmable Clock Oscillator with very flexible frequency programming capabilities. The device uses IDT's fourth generation FemtoClock® NG technology for an optimum high clock frequency and low phase noise performance. The device accepts 2.5V or 3.3V supply and is packaged in a small, lead-free (RoHS 6) 10-lead ceramic 5mm x 7mm x 1.55mm package. Besides the four default power-up frequencies set by the FSEL0 and FSEL1 pins, the 8N4Q001EG-2194CDI8 can be programmed via the I2C interface to output clock frequencies between 15.476MHz to 866.67MHz and from 975MHz to 1,300MHz to a very high degree of precision with a frequency step size of 435.9Hz ÷ N (N is the PLL output divider). Since the FSEL0 and FSEL1 pins are mapped to four independent PLL divider registers (P, MINT, MFRAC and N), reprogramming those registers to other frequencies under control of FSEL0 and FSEL1 is supported. The extended temperature range supports wireless infrastructure, telecommunication and networking end equipment requirements.

Features

FemtoClock® NG Series
Operate frequency at 425MHz 212.5MHz 106.25MHz 159.375MHz
Package / Case: Tape & Reel (TR)
Mounting Type:Surface Mount
Current - Supply：160mA

3.135V ~ 3.465V Voltage - Supply

Applications

There are a lot of Renesas Electronics America Inc.
8N4Q001EG-1052CDI8 Programmable Timers & Oscillators applications.

• Electric Vehicles
• Always On Systems
• Clutch Actuator circuit
• Car Door Handle circuit
• Smart Key
• Remote current sensor
• Intruder Detection
• Power-On Reset Timer
• Long Time One Shot
• “Heartbeat” Timers