IDT 8N4QV01EG-0084CDI8

VCXO622,08 МГц, 669,3266 МГц, 622,08 МГц, 669,3266 МГц3.135V ~ 3.465V-40°C ~ 85°C10-CLCCПоверхностный монтаж

Overview

The 8N4QV01KG-0072CDI8 is a Quad-Frequency Programmable VCXO with very flexible frequency and pull-range programming capabilities. The device uses IDT's fourth generation FemtoClock® NG technology for an optimum of high clock frequency and low phase noise performance. The device accepts 2.5V or 3.3V supply and is packaged in a small, lead-free (RoHS 6) 10-lead ceramic 5mm x 7mm x 1.55mm package. Besides the 4 default power-up frequencies set by the FSEL0 and FSEL1 pins, the 8N4QV01KG-0072CDI8 can be programmed via the I2C interface to any output clock frequency between 15.476MHz to 866.67MHz and from 975MHz to 1,300MHz to a very high degree of precision with a frequency step size of 435.9Hz ÷N (N is the PLL output divider). Since the FSEL0 and FSEL1 pins are mapped to 4 independent PLL, P, M and N divider registers (P, MINT, MFRAC and N), reprogramming those registers to other frequencies under control of FSEL0 and FSEL1 is supported. The extended temperature range supports wireless infrastructure, telecommunication and networking end equipment requirements.

Features

FemtoClock® NG Series
Operate frequency at 622.08MHz 669.3266MHz 622.08MHz 669.3266MHz
Package / Case: Tape & Reel (TR)
Mounting Type:Surface Mount
Current - Supply：160mA

3.135V ~ 3.465V Voltage - Supply

Applications

There are a lot of Renesas Electronics America Inc.
8N4QV01EG-0084CDI8 Programmable Timers & Oscillators applications.

• Remote Sensors
• White Goods
• Electric Vehicles
• Always On Systems
• Clutch Actuator circuit
• Car Door Handle circuit
• Smart Key
• Remote current sensor
• Intruder Detection
• Power-On Reset Timer