Intersil ISL6617CRZ-T

ШИМ-удвоитель6 мА4,5 В ~ 5,5 В

Overview

The ISL6617CRZ utilizes Intersil's proprietary Phase Doubler scheme to modulate two-phase power trains with single PWM input. It doubles the number of phases that Intersil'smulti-phase controllers ISL63xx can support. When the enable pin (EN_PH_SYNC) is pulled low, the PWM input is pulled high. This simplifies the phase shedding implementation for some Intersil controllers (VR10, VR11, VR11.1, and VR12 family) that can disable the respective and higher phase(s) by pulling the respective PWM line high. The ISL6617CRZ is designed to minimize the number of analog signals that interface between the controller and drivers in high phase count scalable applications. The common COMP signal, which is usually seen in conventional cascaded configuration, is not required; this improves noise immunity and simplifies the layout. Furthermore, the ISL6617CRZ provides low part count and low cost advantage over the conventional cascaded technique. By cascading the ISL6617CRZ with another ISL6617CRZ or ISL6611A, it can quadruple the number of phases that Intersil's multi-phase controllers ISL63xx can support. The ISL6617CRZ also features Tri-State input and outputs that recognize a high-impedance state, working together with Intersil multiphase PWM controllers and driver stages to prevent negative transients on the controlled output voltage when operation is suspended. This feature eliminates the need for the schottky diode that may be utilized in a power system to protect the load from excessive negative output voltage damage.

Features

Applications

• Hand-Held Systems
• Space satellite point of load supply
• Communications payload
• Optical imaging payload
• Desktop PC
• Motherboard
• Standard notebook PC
• Chromebook
• WOA
• Docking station