Marvell 88E3016-A2-NNC1C000

ТрансиверIEEE 1149.1, IEEE 802.310 Мбит/с, 100 Мбит/с

Overview

The Marvell® 88E3016-A2-NNC1C000 device is the fourth generation Marvell® DSP-based physical layer transceiver for Fast Ethernet applications. The device contains all the active circuitry to convert data streams to and from a Media Access Controller (MAC) and the physical media. The 88E3016-A2-NNC1C000 device incorporates IEEE 802.3u Auto-Negotiation in support of both 100BASE-TX and 10BASE-T networks over twisted-pair cable in full duplex or half-duplex mode.

• IEEE 802.3 compliant 100BASE-TX and 10BASE-T ports • Reduced Gigabit Media Independent Interface (RGMII) • Virtual Cable Tester® (VCT™) Technology • PECL interface supporting 100BASE-FX applications • Automatic MDI/MDIX crossover for 10BASE-T and 100BASE-TX • Jumbo frame support to 10 Kbytes with up to ±150 ppm clock frequency difference • IEEE 802.3u Auto-Negotiation support for automatic speed and duplex selection • Far-End Fault Indication (FEFI) support for 100BASE-FX applications • Supports 802.3ah Unidirectional Enable • Energy detect feature • Baseline wander correction • Auto-Calibration for MAC Interface outputs • COMA Mode support • Flexible serial management interface (MDC/MDIO) for register access • Programmable interrupt to minimize polling • IEEE 1149.1 Standard Test Access Port and boundary scan compatible • Supports three (3) LEDs per port • 0.15 μm standard digital CMOS process • 64-pin QFN 9 mm x 9 mm package

Features

Alaska® Series
Tray Package
Transceiver Type
IEEE 1149.1, IEEE 802.3 Protocol
4/4 Number of Drivers/Receivers
Full, Half Duplex
10Mbps, 100Mbps Data Rate
1.14V ~ 1.26V, 2.38V ~ 2.62V, 3.14V ~ 3.46V Voltage - Supply
0°C ~ 70°C (TA) Operating Temperature
Surface Mount Mounting Type
360 mV Receiver Hysteresis