Maxim DS1314S

Энергонезависимая оперативная память3 В ~ 3,6 В-40°C ~ 85°C

Overview

The DS1314S Nonvolatile Controller with Battery Monitor is a CMOS circuit which solves the application problem of converting CMOS RAM into nonvolatile memory. Incoming power is monitored for an out-of-tolerance condition. When such a condition is detected, chip enable is inhibited to accomplish write protection and the battery is switched on to supply the RAM with uninterrupted power. Special circuitry uses a low-leakage CMOS process which affords precise voltage detection at extremely low battery consumption. In addition to battery-backup support, the DS1314S performs the important function of monitoring the remaining capacity of the lithium battery and providing a warning before the battery reaches end-of-life. Because the open-circuit voltage of a lithium backup battery remains relatively constant over the majority of its life, accurate battery monitoring requires loaded-battery voltage measurement. The DS1314S performs such measurement by periodically comparing the voltage of the battery as it supports an internal resistive load with a carefully selected reference voltage. If the battery voltage falls below the reference voltage under such conditions, the battery will soon reach end-of-life. As a result, the Battery Warning pin is activated to signal the need for battery replacement.

Features

Tube Package
Available in the 16-SOIC (0.295, 7.50mm Width) package
Nonvolatile RAM as controller type
Operating temperature of -40°C~85°C
Operating supply current of 30μA
Operating supply voltage of 3.3V

Surface Mount Mounting Type

Applications

There are a lot of Maxim Integrated
DS1314S+ Memory Controllers applications.

• NVSRAM Modules
• Point-of-Sale Systems
• Facsimile, Printers and Photocopiers
• Internet Appliances
• Servers
• Medical Instrumentation and Industrial Products
• Industrial USB Flash Drive
• eUSB, embedded USB module
• Ultra durable Flash Drive
• Security Flash Drive