Maxim DS1834AU

Супервизор с несколькими напряжениями3,3 В, 5 В2

Overview

The DS1834AU Dual EconoReset with Pushbutton is designed to monitor power and protect processing in dual-voltage systems. It operates from the higher of a 3-volt or 5-volt input, monitoring both for in-tolerance conditions. When safety thresholds are breached from either input, the DS1834AU initiates reset. On power return, it automatically restarts the processor, maintaining reset for 350ms to allow stabilization. The DS1834AU also monitors a pushbutton input to allow for external over-ride. Using pin adjustments, voltage reset tolerances can be set in different combinations for the 5V and 3.V power supplies, respectively: 10% and 10% 10% and 20% and 5% and 10%. DS1834A NMOS outputs can be wire-AND'd to either the 5-volt or 3-volt level. The DS1834AU and DS1834D have CMOS outputs for low-current operation. The DS1834AU is targeted for multi-voltage microprocessor systems and subsystems, or for buses that do not operate at the same voltage as the μP or core logic. By integrating monitoring functions required for a particular application, the DS1834AU enhances processor reliability with considerable savings in space and cost.

Features

Applications

• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system