Maxim DS2431P+

256 x 42 мкс-40°C ~ 85°C (TA)

Overview

The DS2431P is a 1024-bit, 1-Wire EEPROM chip organized as four memory pages of 256 bits each. Data is written to an 8-byte scratchpad, verified, and then copied to the EEPROM memory. As a special feature, the four memory pages can individually be write protected or put in EPROM-emulation mode, where bits can only be changed from a 1 to a 0 state. The DS2431P communicates over the single-conductor 1-Wire bus. The communication follows the standard 1-Wire protocol. Each device has its own unalterable and unique 64-bit ROM registration number that is factory lasered into the chip. The registration number is used to address the device in a multidrop, 1-Wire net environment.

Features

Package / Case: 6-LSOJ (0.148, 3.76mm Width)
6 Pins
Operating Supply Voltage:5V

Applications

There are a lot of Maxim Integrated DS2431P+ Memory applications.

• eDRAM

• printers

• DVD disk buffer

• graphics card

• embedded logic

• workstations,

• nonvolatile BIOS memory

• telecommunications

• servers

• eSRAM