Maxim MAX11801ETC+T

4-х проводной резистивный12 bI²C, последовательный1,7 В ~ 3,6 В-40°C ~ 85°C

Overview

The MAX11801ETC/V+ is a 3.3V, dual 10-bit, analog-to-digital converter (ADC) featuring fully-differential wideband track-and-hold (T/H) inputs, driving two pipelined, nine-stage ADCs. The MAX11801ETC/V+ is optimized for low-power, high-dynamic performance applications in imaging, instrumentation, and digital communication applications. The MAX11801ETC/V+ operates from a single 2.7V to 3.6V supply, consuming only 413mW, while delivering a typical signal-to-noise ratio (SNR) of 58.5dB at an input frequency of 20MHz and a sampling rate of 105Msps. The T/H driven input stages incorporate 400MHz (-3dB) input amplifiers. The converters may also be operated with single-ended inputs. In addition to low operating power, the MAX11801ETC/V+ features a 2.8mA sleep mode, as well as a 1μA power-down mode to conserve power during idle periods. An internal 2.048V precision bandgap reference sets the full-scale range of the ADC. A flexible reference structure allows the use of the internal or external reference, if desired for applications requiring increased accuracy or a different input voltage range. The MAX11801ETC/V+ features parallel, CMOS-compatible three-state outputs. The digital output format is set to two's complement or straight offset binary through a single control pin. The device provides for a separate output power supply of 1.7V to 3.6V for flexible interfacing. The MAX11801ETC/V+ is available in a 7mm x 7mm, 48-pin TQFP package, and is specified for the extended industrial (-40°C to +85°C) temperature range. Pin-compatible higher and lower speed versions of the MAX11801ETC/V+ are also available. Please refer to the MAX1181 data sheet for 80Msps, the MAX1182 data sheet for 65Msps, the MAX1183 data sheet for 40Msps, and the MAX1184 data sheet for 20Msps. In addition to these speed grades, this family includes a 20Msps multiplexed output version (MAX1185), for which digital data is presented time-interleaved on a single, parallel 10-bit output port.

Features

Applications

• Audio/Video devices
• Cell Phones
• Digital Multimeters, PLC's (Programming Logic Controllers)
• RADAR processing, digital oscilloscopes
• CMOS Image sensors for mobile applications
• Medical Instrumentation and medical imaging
• Music recording
• Digital signal processing
• Scientific instruments
• Rotary encoder