Maxim MAX14919AATP+

Общее назначение4Не требуется

Overview

The MAX148/MAX1491CAI 10-bit data-acquisition systems combine an 8-channel multiplexer, high-bandwidth track/hold, and serial interface with high conversion speed and low power consumption. They operate from a single +2.7V to +5.25V supply, and sample to 133ksps. Both devices’ analog inputs are software configurable for unipolar/bipolar and single-ended/differential operation. The 4-wire serial interface connects directly to SPI/QSPI and MICROWIRE devices without external logic. A serial-strobe output allows direct connection to TMS320-family digital signal processors. The MAX148/MAX1491CAI use either the internal clock or an external serial-interface clock to perform successive-approximation analog-to-digital conversions. The MAX1491CAI has an internal 2.5V reference, while the MAX148 requires an external reference. Both parts have a reference-buffer amplifier with a ±1.5% voltage-adjustment range. These devices provide a hard-wired active-low SHDN pin and a software-selectable power-down, and can be programmed to automatically shut down at the end of a conversion. Accessing the serial interface automatically powers up the MAX148/MAX149, and the quick turn-on time allows them to be shut down between all conversions. This technique can cut supply current to under 60μA at reduced sampling rates. The MAX148/MAX1491CAI are available in 20-pin PDIP and 20-pin SSOP packages. For 4-channel versions of these devices, see the MAX1248/MAX1249 data sheet.

Features

Tray Package
General Purpose Switch Type
4 Number of Outputs
1:1 Ratio - Input:Output
Low Side Output Configuration
Logic Interface
4.5V ~ 5.5V Voltage - Load
Not Required Voltage - Supply (Vcc/Vdd)
140mOhm Rds On (Typ)
Shutdown Features
Over Temperature, Reverse Current, UVLO Fault Protection
Surface Mount Mounting Type