Maxim MAX2361EGM

1,7 ГГц ~ 2 ГГц7,7 дБм ~ 10,7 дБм

Overview

The MAX2361EGM dual-band, triple-mode complete transmitter for cellular phones represents an integrated and architecturally advanced solution for this application. The device takes a differential I/Q baseband input and converts it up to IF through a quadrature modulator and IF variable-gain amplifier (VGA). The signal is then routed to an external bandpass filter and upconverted to RF through an image-reject mixer and RF VGA. The signal is further amplified with an on-chip PA driver. An IF synthesizer, an RF synthesizer, a local oscillator (LO) buffer, and a 3-wire programmable bus complete the basic functional blocks of this IC. The MAX2363 supports single-band, single-mode (PCS) operation. The MAX2365 supports single-band cellular dual-mode operation. The MAX2361EGM enables architectural flexibility because of its two IF voltage-controlled oscillators (VCOs), two IF ports, two RF LO input ports, and three PA driver output ports. The devices allow the use of a single receive IF frequency and split-band PCS filters for optimum out-ofband noise performance. The low-noise PA drivers allow up to three RF SAW filters to be eliminated. Select a mode of operation by loading data on the SPI™/QSPI™/MICROWIRE™-compatible 3-wire serial bus. Charge-pump current, IF/RF gain balancing, standby, shutdown plus additional functions, are also controlled with the serial interface. The MAX2361/MAX2363/MAX2365 come in a 48-pin TQFN-EP and QFN-EP package and are specified for the extended (-40°C to +85°C) temperature range.

Features ♦ Dual-Band, Triple-Mode Operation ♦ +9dBm Linear Output Power ♦ 100dB Power-Control Range ♦ Supply Current Drops as Output Power is Reduced ♦ Dual Synthesizer for IF and RF LO ♦ Dual On-Chip IF VCO ♦ QSPI/SPI/MICROWIRE-Compatible 3-Wire Bus ♦ Digitally Controlled Operational Modes ♦ Single Sideband Upconverter Eliminates SAW Filters ♦ Directly Drives Power Amplifier

Features