Maxim MAX4948ERA+T

SPDT2:165,5 Ом1,8 В ~ 5,5 В

Overview

The dual MAX492, quad MAX494, and single MAX495 operational amplifiers combine excellent DC accuracy with rail-to-rail operation at the input and output. Since the common-mode voltage extends from VCC to VEE, the devices can operate from either a single supply (+2.7V to +6V) or split supplies (±1.35V to ±3V). Each op amp requires less than 150μA supply current. Even with this low current, the op amps are capable of driving a 1kΩ load, and the input referred voltage noise is only 25nV/√Hz. In addition, these op amps can drive loads in excess of 1nF. The precision performance of the MAX492/MAX494/MAX495, combined with their wide input and output dynamic range, low-voltage single-supply operation, and very low supply current, makes them an ideal choice for battery-operated equipment and other low-voltage applications. The MAX492/MAX494/MAX495 are available in DIP and SO packages in the industry-standard op-amp pin configurations. The MAX495 is also available in the smallest 8-pin SO: the μMAX package.

Features

Tape & Reel (TR) Package
SPDT Switch Circuit
2:1 Multiplexer/Demultiplexer Circuit
6 Number of Circuits
5.5Ohm On-State Resistance (Max)
300mOhm Channel-to-Channel Matching (ΔRon)
1.8V ~ 5.5V Voltage - Supply, Single (V+)
800ns, 800ns Switch Time (Ton, Toff) (Max)
300MHz -3db Bandwidth
10pC Charge Injection
15pF, 25pF Channel Capacitance (CS(off), CD(off))
3nA Current - Leakage (IS(off)) (Max)
Surface Mount Mounting Type