Maxim MAX542ACSD

Напряжение - небуферизованноеSPI5V0°C ~ 70°C

Overview

The MAX541/MAX542ACSD are serial-input, voltage-output, 16-bit digital-to-analog converters (DACs) that operate from a single +5V supply. They provide 16-bit performance (±1LSB INL and DNL) over temperature without any adjustments. The DAC output is unbuffered, resulting in a low supply current of 0.3mA and a low offset error of 1LSB. The DAC output range is 0V to VREF. For bipolar operation, matched scaling resistors are provided in the MAX542ACSD for use with an external precision op amp (such as the MAX400), generating a ±VREF output swing. The MAX542ACSD also includes Kelvin-sense connections for the reference and analog ground pins to reduce layout sensitivity. A 16-bit serial word is used to load data into the DAC latch. The 10MHz, 3-wire serial interface is compatible with SPI/QSPI/MICROWIRE, and it also interfaces directly with optocouplers for applications requiring isolation. A power-on reset circuit clears the DAC output to 0V (unipolar mode) when power is initially applied. The MAX541 is available in 8-pin plastic DIP and SO packages. The MAX542ACSD is available in 14-pin plastic DIP and SO packages.

Features

Applications

• Data Acquisition Systems
• Calibration
• Motor Control
• Data Distribution System
• Digital Potentiometer
• Software Radio
• Wireless infrastructure:
• WCDMA, CDMA2000, TD-SCDMA, WiMAX
• Wideband communications:
• LMDS/MMDS, point-to-point