Maxim MAX5742EUB+

Напряжение - буферизованноеSPI, DSP2,7 В ~ 5,5 В-40°C ~ 85°C

Overview

The MAX5742EUB quad, 12-bit, low-power, buffered voltage-output, digital-to-analog converter (DAC) is packaged in a space-saving 10-pin μMAX package (5mm x 3mm). The wide supply voltage range of +2.7V to +5.5V and 229μA supply current accommodates low-power and low-voltage applications. DAC outputs employ on-chip precision output amplifiers that swing rail-to-rail. The MAX5742's reference input accepts a voltage range from 0 to VDD. In power-down the reference input is high impedance, further reducing the system's total power consumption. The 20MHz, 3-wire SPI, QSPI, MICROWIRE and DSP-compatible serial interface saves board space and reduces the complexity of opto- and transformer-isolated applications. The MAX5742EUB on-chip power-on reset (POR) circuit resets the DAC outputs to zero and loads the output with a 100kΩ resistor to ground. This provides additional safety for applications that drive valves or other transducers that need to be off on power-up. The MAX5742's software-controlled power-down reduces supply current to less than 0.3μA and provides software-selectable output loads (1kΩ, 100kΩ, or high impedance) while in power-down. The MAX5742EUB is specified over the -40°C to +125°C automotive temperature range.

Features

Applications

• Audio Amplifier
• Video Encoder
• Display Electronics
• Data Acquisition Systems
• Calibration
• Motor Control
• Data Distribution System
• Digital Potentiometer
• Software Radio
• Wireless infrastructure: