Maxim MAX5811NEUT-T

Напряжение - буферизованноеI²C2,7 В ~ 5,5 В-40°C ~ 85°C

Overview

The MAX5811NEUT is a single, 10-bit voltage-output digital-to-analog converter (DAC) with an I2C-compatible 2-wire interface that operates at clock rates up to 400kHz. The device operates from a single 2.7V to 5.5V supply and draws only 100μA at VDD = 3.6V. A low-power power-down mode decreases current consumption to less than 1μA. The MAX5811NEUT features three software-selectable power-down output impedances: 100kΩ, 1kΩ, and high impedance. Other features include an internal precision Rail-to-Rail output buffer and a power-on reset (POR) circuit that powers up the DAC in the 100kΩ power-down mode. The MAX5811NEUT features a double-buffered I2C-compatible serial interface that allows multiple devices to share a single bus. All logic inputs are CMOS-logic compatible and buffered with Schmitt triggers, allowing direct interfacing to optocoupled and transformer-isolated interfaces. The MAX5811NEUT minimizes digital noise feedthrough by disconnecting the clock (SCL) signal from the rest of the device when an address mismatch is detected. The MAX5811NEUT is specified over the extended temperature range of -40°C to +85°C and is available in a space-saving 6-pin SOT23 package. Refer to the MAX5812 data sheet for the 12-bit version.

Features

Applications

• Audio Amplifier
• Video Encoder
• Display Electronics
• Data Acquisition Systems
• Calibration
• Motor Control
• Data Distribution System
• Digital Potentiometer
• Software Radio
• Wireless infrastructure: