Maxim MAX8685AETD+

Зарядное устройство конденсатора фотовспышки2,5 В ~ 5,5 В

Overview

The MAX8685AETD+ inverting charge pump provides a low-cost and compact means of generating a regulated negative voltage up to -2 x VIN from a positive input voltage between 1.8V and 5.5V. It uses a pulse-frequency-modulation (PFM) control scheme to generate the regulated negative output voltage. PFM operation is obtained by gating the internal 450kHz oscillator on and off as needed to maintain output voltage regulation. This unique on-demand switching scheme gives the MAX8685AETD+ excellent light-load efficiency without degrading its full-load operation (up to 30mA), permitting smaller capacitors to take advantage of the oscillator's high switching frequency. The MAX8685AETD+ requires no inductors; only four capacitors are required to build a complete DC-DC converter. Output voltage regulation is achieved by adding just two resistors. The MAX8685AETD+ comes in a 10-pin μMAX package, which is only 1.11mm high and occupies just half the board area of a standard 8-pin SO.

Features

Applications

• SmartPhones
• Portable Navigation Devices
• Portable Media Players
• Portable Systems
• Hand-Held Systems
• Space satellite point of load supply
• Communications payload
• Optical imaging payload
• Desktop PC
• Motherboard