Microchip ATTINY45V-10SU

AVR10 МГц4 КБ (2К x 16)

Overview

The high-performance, low-power Atmel 8-bit AVR RISC-based microcontroller combines 4KB ISP flash memory, 256-Byte EEPROM, 256B SRAM, 6 general purpose I/O lines, 32 general purpose working registers, one 8-bit timer/counter with compare modes, one 8-bit high speed timer/counter, USI, internal and external Interrupts, 4-channel 10-bit A/D converter, programmable watchdog timer with internal oscillator, three software selectable power saving modes, and debugWIRE for on-chip debugging. The device achieves a throughput of 20 MIPS at 20 MHz and operates between 2.7-5.5 volts.By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and processing speed.

Features

• Fully static operation

• Advanced RISC architecture

• On-chip analog comparator

• Internal calibrated oscillator

• Six programmable I/O lines

• Enhanced power-on reset circuit

• DebugWIRE on-chip debug system

• In-system programmable via SPI port

• External and internal interrupt sources

• 32 x 8 General purpose working registers

• Programmable brown-out detection circuit

• 8-bit high speed Timer/counter with separate prescaler

• USI-universal serial interface with start condition detector

• 120 Powerful instructions most single clock cycle execution

• 8-bit Timer/counter with prescaler and two PWM channels

• Low power idle, ADC noise reduction and power-down modes

• Programmable watchdog timer with separate on-chip oscillator

• 300µA at 1.8V (1MHz System Clock) Active mode power consumption

Applications

• Motor Drive & Control