Microchip MIC284-1BM

Цифровой, локальный/дистанционный-55°C ~ 125°C-55°C ~ 125°CI²C/SMBus2,7 В ~ 5,5 В7 b±2°C (±3°C)

Overview

The MIC284-0BM is a versatile digital thermal supervisor capable of measuring temperature using its own internal sensor and an inexpensive external sensor or embedded silicon diode such as those found in the Intel Pentium III® CPU. A 2-wire serial interface is provided to allow communication with either I2C or SMBus masters. Features include an open-drain over-temperature output with dedicated registers for implementing fan control or over-temperature shutdown circuits.Interrupt status and mask bits are provided for reduced software overhead. The open-drain interrupt output pin can be used as either an overtemperature alarm or a thermostatic control signal. A programmable address pin permits two devices to share the bus. (Alternate base addresses available-contact Micrel.) Superior performance, low power and small size makes the MIC284-0BM an excellent choice for the most demanding thermal management applications. The MIC284-0BM is part of the SilentSense® family of thermal supervisors.Data sheets and support documentation can be found on Micrel's web site at www.micrel.com.

Features

I²C/SMBus Output Type
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Bulk Package
Operating Temperature: -55°C~125°C
Supply Voltage: 2.7V~5.5V
Local Sensing Temperature: -55°C~125°C
Highest (Lowest) Accuracy: ±2°C (±3°C)
Sensor Type: Digital, Local/Remote

Surface Mount Mounting Type

Applications

There are a lot of Microchip Technology
MIC284-1BM Analog & Digital Sensors applications.

• Energy saving at office (air-conditining/ighting control)
• Digital signage
• Automatic doors/elevators
• Industrial
• HVAC
• Disk Drives
• Automotive
• Portable Medical Instruments
• Computers
• Battery Management