Microchip PM5377-FI

SONET/SDHМикропроцессор1.2V

Overview

• RASIO 3G high-speed serial ingress and egress links.• Low-power 1.2 V CMOS core logic with 2.5V digital outputs and 3.3V tolerant 2.5V digital inputs. • 1152-pin FCBGA, 35 x 35 mm. • Driven by a 155.52 MHz reference clock.• Provides a standard five signal IEEE 1149.1 JTAG test port for boundary scan board test.• Provides a generic 16-bit microprocessor bus interface for configuration, control, and status monitoring.• 23 W typical power consumption when all features and links @ 2.488 Gbit/s are enabled and active.

• Implements a 240G memory switch fabric with STS-1/AU-3 switching granularity.• 96 ingresses and 96 egress STS48/STS-12 ports for a maximum of 4608 STS-1/AU-3 streams in a single device.• Supports a single-stage, anycast switching capacity of 240G.SWITCH PORT CONFIGURATION• Each port can be individually configured for 2.488Gbit/s or 622Mbit/s operation. Ingress and egress links of a port can be individually configured.• Optionally inserts AIS on ingress links that are out-of-frame.• Supports unequipped overwrite, and path AIS overwrite on a per egress port and per egress grain basis.• Implements the ESSI Frame layer TOH PROCESSING AND TESTING• Supports transport overhead processing of ports in groups of 24.• TOH extract clock and data interface capable of extracting a set of TOH bytes per ingress port. Selection of the bytes to be extracted is user programmable on a per 24-port group basis.• TOH insert clock and data interface capable of overwriting a set of TOH bytes per egress port. Selection of the bytes to overwrite is user programmable on a per 24-port group basis

Features