Свяжитесь с нами
pусский
LM1949N

NS LM1949N

Автомобильная промышленность28 мА3 В ~ 5,5 В

Сравнить
National Semiconductor
LM1949N
BUFFER/INVERTER BASED PERIPHERAL
Нет технического описания
paypalvisamastercarddiscover
upsdhlsf
Сравнить

₽269.05

Обновление цены:несколько месяцев назад

Гарантия качества Bostock

912ob9001 201514001 201545001 201813485 2016esdduns
Детали продукта

Overview

FEATURES • Low voltage supply (3V–5.5V) • 22 mA output drive current • No RFI radiation • Adaptable to all injector current levels • Highly accurate operation • TTL/CMOS compatible input logic levels • Short circuit protection • High impedance input • Externally set holding current, IH • Internally set peak current (4 × IH) • Externally set time-out • Can be modified for full switching operation • Available in plastic 8-pin minDIP APPLICATIONS • Fuel injection • Solenoid controls • Air and fluid valves • DC motor drives DESCRIPTION The LM1949 linear integrated circuit serves as an excellent control of fuel injector drive circuitry in modern automotive systems. The IC is designed to control an external power NPN Darlington transistor that drives the high current injector solenoid. The current required to open a solenoid is several times greater than the current necessary to merely hold it open; therefore, the LM1949, by directly sensing the actual solenoid current, initially saturates the driver until the “peak” injector current is four times that of the idle or “holding” current (Figure 3–Figure 6). This guarantees opening of the injector. The current is then automatically reduced to the sufficient holding level for the duration of the input pulse. In this way, the total power consumed by the system is dramatically reduced. Also, a higher degree of correlation of fuel to the input voltage pulse (or duty cycle) is achieved, since opening and closing delays of the solenoid will be reduced. Normally powered from a 5V ± 10% supply, the IC is typically operable over the entire temperature range (−55°C to +125°C ambient) with supplies as low as 3 volts. This is particularly useful under “cold crank” conditions when the battery voltage may drop low enough to deregulate the 5-volt power supply. The LM1949 is available in the plastic miniDIP, (contact factory for other package options). 

Features

Bulk Package
Mainly used in Automotive applications
Operating temperature: -40°C~125°C

Through Hole Mounting Type

Applications


There are a lot of Texas Instruments
LM1949NPower Management applications.

  • Netbooks
  • SmartPhones
  • Portable Navigation Devices
  • Portable Media Players
  • Portable Systems
  • Hand-Held Systems
  • Space satellite point of load supply
  • Communications payload
  • Optical imaging payload
  • Desktop PC
Характеристики продукта
Выбрать все
Пакет: Насыпной
Статус части: Активный
Примеры использования: Автомобильная промышленность
Ток - питание: 28 мА
Напряжение питания: 3 В ~ 5,5 В
Рабочая температура: -40°C ~ 125°C
Тип крепления: Сквозное отверстие
Упаковка / Кейс: 8-DIP (0,300", 7,62 мм)
Поставщик Упаковка устройства: 8-PDIP
National Semiconductor

National Semiconductor

Компания National Semiconductor, основанная в 1959 году со штаб-квартирой в Санта-Кларе, штат Калифорния, является ведущим производителем аналоговых полупроводников. В 2011 году компания была приобретена Texas Instruments, что еще больше укрепило ее лидирующие позиции на рынке аналоговых полупроводников. В 2011 году компания National Semiconductor была приобретена Texas Instruments, что еще больше укрепило ее лидерство на рынке аналоговых полупроводников.

Новosti в реальном времени

Bostock по цифрам

Доход: 85M

$85 миллионов в доходах в 2022 году, увеличение на 63% по сравнению с 2021 годом.

Страны: 105

Bostock обслуживает клиентов в 105 странах мира.

Отгруженные части: 25M+

Мы отгрузили более 25 миллионов частей за последние пять лет, что составляет увеличение на 148% по сравнению с предыдущими пятью годами.

Производители: 950

В 2022 году Bostock продал части от более чем 950 производителей.

Все номера деталей продукции 0 - Z