Свяжитесь с нами
pусский
LM2630MTCX-ADJ

NS LM2630MTCX-ADJ

Step-DownБак4,5 В ~ 30 В

Сравнить
National Semiconductor
LM2630MTCX-ADJ
SWITCHING CONTROLLER
paypalvisamastercarddiscover
upsdhlsf
Сравнить

₽162.68

Обновление цены:несколько месяцев назад

Гарантия качества Bostock

912ob9001 201514001 201545001 201813485 2016esdduns
Детали продукта

Overview

The LM2630MTCX-ADJ is a precision, single digital-output, low-power thermostat comprised of an internal reference, DAC, temperature sensor and comparator. Utilizing factory programming, it can be manufactured with different trip points as well as different digital output functionality. The trip point (TOS) can be preset at the factory to any temperature in the range of 55°C to 110°C in 1°C increments. The LM2630MTCX-ADJ has one digital output (OS/OS/US/US), one digital input (HYST) and one analog output (VTEMP). The digital output stage can be preset as either open-drain or push-pull. In addition, it can be factory programmed to be active HIGH or LOW. The digital output can be factory programmed to indicate an over temperature shutdown event (OS or OS) or an under temperature shutdown event (US or US). When preset as an overtemperature shutdown (OS) it will go LOW to indicate that the die temperature is over the internally preset TOS and go HIGH when the temperature goes below (TOS–THYST). Similarly, when preprogrammed as an undertemperature shutdown (US) it will go HIGH to indicate that the temperature is below TUS and go LOW when the temperature is above (TUS+THYST). The typical hysteresis, THYST, can be set to 2°C or 10°C and is controlled by the state of the HYST pin. A VTEMP analog output provides a voltage that is proportional to temperature and has a 10.82 mV/°C output slope.

Available parts are detailed in the Device Comparison Table. For other part options, contact a Texas Instruments Distributor or Sales Representative for information on minimum order qualification. The LM2630MTCX-ADJ is currently available in a 5-lead SOT-23 package.

Features

Bulk Package
Transistor Driver Output Type
Positive Output Configuration
Buck Topology
2 Number of Outputs
1 Output Phases
4.5V ~ 30V Voltage - Supply (Vcc/Vdd)
200kHz ~ 400kHz Frequency - Switching
96% Duty Cycle (Max)
Yes Synchronous Rectifier
Yes Clock Sync
Current Limit, Dead Time Control, Enable, Frequency Control, Power Good, Soft Start Control Features
Surface Mount Mounting Type
Характеристики продукта
Выбрать все
Пакет: Насыпной
Статус части: Активный
Тип выхода: Транзисторный драйвер
Функция: Step-Down
Конфигурация выхода: Позитив
Топология: Бак
Количество выходов: 2
Выходные фазы: 1
Напряжение питания (Vcc/Vdd): 4,5 В ~ 30 В
Частота - Переключение: 200 кГц ~ 400 кГц
Максимальный рабочий цикл: 96%
Синхронный выпрямитель: Да
Синхронизация часов: Да
Особенности управления: Ограничение тока, контроль мертвого времени, включение, контроль частоты, питание, плавный пуск
Рабочая температура: -40°C ~ 125°C (TJ)
Тип крепления: Поверхностный монтаж
Упаковка / Кейс: 20-TSSOP (0,173", ширина 4,40 мм)
Поставщик Упаковка устройства: 20-TSSOP
National Semiconductor

National Semiconductor

Компания National Semiconductor, основанная в 1959 году со штаб-квартирой в Санта-Кларе, штат Калифорния, является ведущим производителем аналоговых полупроводников. В 2011 году компания была приобретена Texas Instruments, что еще больше укрепило ее лидирующие позиции на рынке аналоговых полупроводников. В 2011 году компания National Semiconductor была приобретена Texas Instruments, что еще больше укрепило ее лидерство на рынке аналоговых полупроводников.

Новosti в реальном времени

Bostock по цифрам

Доход: 85M

$85 миллионов в доходах в 2022 году, увеличение на 63% по сравнению с 2021 годом.

Страны: 105

Bostock обслуживает клиентов в 105 странах мира.

Отгруженные части: 25M+

Мы отгрузили более 25 миллионов частей за последние пять лет, что составляет увеличение на 148% по сравнению с предыдущими пятью годами.

Производители: 950

В 2022 году Bostock продал части от более чем 950 производителей.

Все номера деталей продукции 0 - Z