Renesas X9241AUS

Линейный46450kI²C5V0°C ~ 70°C

Overview

The X9241AUS integrates four digitally controlled potentiometers (XDCP) on a monolithic CMOS integrated microcircuit. The digitally controlled potentiometer is implemented using 63 resistive elements in a series array. Between each element are tap points connected to the wiper terminal through switches. The position of the wiper on the array is controlled by the user through the 2-wire bus interface. Each potentiometer has associated with it a volatile Wiper Counter Register (WCR) and 4 nonvolatile Data Registers (DR0:DR3) that can be directly written to and read by the user. The contents of the WCR controls the position of the wiper on the resistor array through the switches. Power up recalls the contents of DR0 to the WCR. The XDCP can be used as a three-terminal potentiometer or as a two-terminal variable resistor in a wide variety of applications including control, parameter adjustments, and signal processing.

Features: • Four potentiometers in one package • 2-wire serial interface • Register oriented format - Direct read/write/transfer of wiper positions - Store as many as four positions per   potentiometer • Terminal Voltages: +5V, -3.0V • Cascade resistor arrays • Low power CMOS • High Reliability - Endurance–100,000 data changes per bit per register - Register data retention–100 years • 16-bytes of nonvolatile memory • 3 resistor array values - 2kΩ to 50kΩ mask programmable - Cascadable for values of 500Ω to 200kΩ • Resolution: 64 taps each pot • 20 Ld plastic DIP, 20 Ld TSSOP and 20 Ld SOIC   packages • Pb-free plus anneal available (RoHS compliant)

Features

Applications

• Refrigerator
• Programmable computer
• Power supply
• Power meter
• Automatic detection of equipment
• Optic fiber network
• Adjusting the LCD Display
• Voltage control
• Replaces mechanical potentiometers
• Matching Linear Impedance