Renesas X9250TS24I-2.7

Линейный4256100kSPI±2,7 В ~ 5,5 В-40°C ~ 85°C

Overview

The X9250TS24I-2.7 integrates 4 digitally controlled potentiometers (XDCP) on a monolithic CMOS integrated circuit.The digitally controlled potentiometer is implemented using 255 resistive elements in a series array. Between each element are tap points connected to the wiper terminal through switches. The position of the wiper on the array is controlled by the user through the SPI bus interface. Each potentiometer has associated with it a volatile Wiper Counter Register (WCR) and 4 nonvolatile Data Registers (DR0:DR3) that can be directly written to and read by the user. The contents of the WCR controls the position of the wiper on the resistor array though the switches. Power up recalls the contents of DR0 to the WCR.The XDCP can be used as a three-terminal potentiometer or as a two-terminal variable resistor in a wide variety of applications including control, parameter adjustments, and signal processing.• Four potentiometers in one package• 256 resistor taps/pot - 0.4% resolution• SPI serial interface• Wiper resistance, 40Ω typical @ VCC = 5V• Four nonvolatile data registers for each pot• Nonvolatile storage of wiper position• Standby current < 5µA max (total package)• Power supplies— VCC = 2.7V to 5.5V— V+ = 2.7V to 5.5V— V– = -2.7V to -5.5V• 100kΩ, 50kΩ total pot resistance• High reliability— Endurance – 100,000 data changes per bit per register— Register data retention - 100 years• 24-lead SOIC, 24-lead TSSOP• Dual supply version of X9251

Features

XDCP™ Series
Tube Package
Linear Taper
Potentiometer Configuration
4 Number of Circuits
256 Number of Taps
100k Resistance (Ohms)
SPI Interface
±2.7V ~ 5.5V Voltage - Supply
Selectable Address Features
±20% Tolerance
±300ppm/°C Temperature Coefficient (Typ)
Surface Mount Mounting Type
150 Resistance - Wiper (Ohms) (Typ)