Richtek RT9467GQW

Литий-ионный/полимерный5A-40°C ~ 125°C (TJ)

Overview

The RT9467GQW is a switch-mode single cell Li-Ion/Li-Polymer battery charger for portable applications. It integrates a synchronous PWM controller, power MOSFETs, input current sensing and regulation, high-accuracy voltage regulation, and charge termination. The charge current is regulated through integrated sensing resistors. The RT9467GQW also features USB On-The-Go (OTG) support. RT9467GQW integrates D+/D- pin for USB host/charging port detection. The RT9467GQW optimizes for charging task by using a control algorithm to vary the charge rate for different modes, including pre-charge mode, fast charge mode (constant voltage and constant current). The key charge parameters are programmable through an I2 C interface. The RT9467 will resume the charge cycle whenever the battery voltage falls below an internal recharge threshold, and can automatically enter sleep mode if the input power supply is removed. Other features include under-voltage protection, over voltage protection, thermal regulation and reverse leakage protection. The RT9467GQW is available in a WQFN-24L 4x4 package. Applications Cellular Telephones Personal Information Appliances Tablet PC, Power Bank Portable Instruments Features High Efficiency 5A, 1.5MHz Switching Charger with Output Inductor DFE252012F, TOKO  Charging Efficiency 90.25% at ICHG = 2A  Charging Efficiency 88.86% at ICHG = 3A  Charging Efficiency 84.2% at ICHG = 5A Synchronous 1.5MHz/0.75MHz Fixed-Frequency PWM Controller with Up to 95% Duty Cycle Power Path Management by BATFET Control Support High Voltage Input (9V/12V) Support High Voltage Input Adapter (Pump Express 1.0/2.0) Support IR Compensation Function from Charger Output to Cell Terminal Optimize Input Sourcing Capability to Prevent Overload  AICR Current Limit Setting via I2C  ILIM Pin for Current Limit Setting  Average Input Current Limit Measurement Shipping Mode for Battery Leakage Reduction  Wake Up System, Exit Shipping Mode, and Reset System by QON Pin Automatic Charging Average Input Current Regulation (AICR) : 0.1A to 3.25A in 50mA Steps Charge Current Regulation Accuracy : ±7% Charge Voltage Regulation Accuracy : ±1% (0 to 85°C) Protection for Overall System Considerations  Thermal Regulation for Current Reduction and Over-Temperature Protection  Input Over-Voltage Protection  Input Bad Adapter Protection  Battery Over-Voltage Protection Support ADC Conversion for  VBUS, VBAT, VSYS, REGN, TS_BAT, IBUS, IBAT, TEMP_JC INT Output for Communication with Host Through I2C (Watch Dog / Polling Function)

Features

Applications

• Personnel carriers
• Maintenance shops
• Rental fleets
• Truck dealers
• Floor scrubber
• Material handling
• Man lift
• Boat
• Cellphones
• Laptops