Richtek RT9742UNGJ5

USB-переключатель1Не требуется1.5A

Overview

The RT9742CGJ5 is a cost effective, low voltage, single N-MOSFET high side power switch IC with flag output for USB application in 5 pin TSOT-23 package. It provides low switch on-resistance and low supply current. The RT9742 integrates an overcurrent protection circuit, short fold back circuit, thermal shutdown circuit and an undervoltage lockout circuit for overall protection. A flag output is available to indicate fault conditions to local USB controller. The chip also integrates an embedded delay function to prevent miss operation from happening due to inrush current. The device is an ideal solution for self powered and bus powered USB applications. It is equipped with a charge pump circuitry to drive the internal N-MOSFET switch. The RT9742 continuously monitors the output current for overcurrent protection to protect system power, power switch and load from damage during output short circuit. It has 140°C thermal shutdown protection and 20°C thermal shutdown hysteresis.

Features

Tape & Reel (TR) Package
USB Switch Switch Type
1 Number of Outputs
1:1 Ratio - Input:Output
High Side Output Configuration
On/Off Interface
2.7V ~ 6V Voltage - Load
Not Required Voltage - Supply (Vcc/Vdd)
1.5A Current - Output (Max)
70mOhm Rds On (Typ)
Load Discharge, Status Flag Features
Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO Fault Protection
Surface Mount Mounting Type