Skyworks AAT4285IJS-3-T1

Общее назначение1Не требуется1.7A

Overview

The AAT4282BIPS-3-T1 is SLEW RATE DUAL LOAD SWITCH, that includes ASPM? Series, they are designed to operate with a Digi-ReelR Alternate Packaging Packaging, Package Case is shown on datasheet note for use in a 8-WFDFN Exposed Pad, that offers Input Type features such as Non-Inverting, it has an Operating Temperature range of -40°C ~ 85°C (TA), as well as the P-Channel Output Type, the device can also be used as Load Discharge, Slew Rate Controlled Features. In addition, the Interface is On/Off, the device is offered in 8-TDFN (2x2) Supplier Device Package, the device has a 1899/12/30 1:01:00 of Ratio Input:Output, and Number of Outputs is 2, and the Voltage Supply Vcc Vdd is Not Required, and Output Configuration is High Side, and the Rds On Typ is 63 mOhm, and Voltage Load is 1.5 V ~ 6.5 V, and the Current Output Max is 3A, and Switch Type is General Purpose.

The AAT4282AIPS-3-T1 is Semiconductors>Integrated Circuits - ICs>Switch ICs>Power Switch ICs - Power Distribution manufactured by ANALOGIC. The AAT4282AIPS-3-T1 is available in DFN-8 Package, is part of the IC Chips, , and with support for Semiconductors>Integrated Circuits - ICs>Switch ICs>Power Switch ICs - Power Distribution, IC CTRL LOAD SWITCH 8FTDFN, Power Switch ICs - Power Distribution Dual Slew Rate Ctrl NON STOCKED.

Features

Applications

• Notebook PC
• Telecom and Network Systems
• PC Card Hot Swap
• Storage Drives
• Portable/Handheld Devices
• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap