ST L6386ADTR

Полумост217 В (макс.)

Overview

The L6386ADTR is a high voltage gate driver, manufactured with the BCD? “offline” technology, and able to drive simultaneously one high and one low-side power MOSFET or IGBT device. The high-side (floating) section is able to work with voltage rail up to 600 V. Both device outputs can independently sink and source 650 mA and 400 mA respectively and can be simultaneously driven high in order to drive asymmetrical half-bridge configurations.

The L6386ADTR device provides two input pins, two output pins and an enable pin (SD), and guarantees the outputs switch in phase with inputs. The logic inputs are CMOS/TTL compatible to ease the interfacing with controlling devices. The L6386ADTR integrates a comparator (inverting input internally referenced to 0.5 V) that can be used to protect the device against fault events, like overcurrent. The DIAG output is a diagnostic pin, driven by the comparator, and used to signal a fault event occurrence to the controlling device. The bootstrap diode is integrated in the driver allowing a more compact and reliable solution. The L6386ADTR device features the UVLO protection on both supply voltages (VCC and VBOOT) ensuring greater protection against voltage drops on the supply lines. The device is available in a SO-14 package, in tube, and tape and reel packaging.

Features

Tape & Reel (TR) Package
Embedded in the Cut Tape (CT) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 750mW

Surface Mount Mounting Type

Applications

There are a lot of STMicroelectronics
L6386ADTR gate drivers applications.

• Video amplifiers
• PCMCIA applications
• A/D drivers
• Line drivers
• Portable computers
• High-speed communications
• RGB applications
• Broadcast equipment
• Active filtering
• Head-up and Head mounted displays