ST LM2903N

Общее назначениеCMOS, DTL, ECL, MOS, Open-Collector, TTL

Overview

The LM393 series are dual independent precision voltage comparators capable of single or split supply operation. These devices are designed to permit a common mode range–to–ground level with single supply operation. Input offset voltage specifications as low as 2.0 mV make this device an excellent selection for many applications in consumer automotive, and industrial electronics. • Wide Single–Supply Range: 2.0 Vdc to 36 Vdc • Split–Supply Range: ±1.0 Vdc to ±18 Vdc • Very Low Current Drain Independent of Supply Voltage: 0.4 mA • Low Input Bias Current: 25 nA • Low Input Offset Current: 5.0 nA • Low Input Offset Voltage: 2.0 mV (max) LM393A   5.0 mV (max) LM293/393 • Input Common Mode Range to Ground Level • Differential Input Voltage Range Equal to Power Supply Voltage • Output Voltage Compatible with DTL, ECL, TTL, MOS, and CMOS Logic    Levels • ESD Clamps on the Inputs Increase the Ruggedness of the Device   without Affecting Perfo

Features

• Single-Supply or Dual Supplies

• Wide Range of Supply Voltage

      Maximum Rating: 2 V to 36 V

      Tested to 30 V: Non-V Devices

      Tested to 32 V: V-Suffix Devices

• Low Output Saturation Voltage

• Low Input Bias Current: 25 nA (Typical)

• Low Input Offset Voltage: 2 mV (Typical)

• On Products Compliant to MIL-PRF-38535

• Output Compatible With TTL, MOS, and CMOS

• Low Input Offset Current: 3 nA (Typical) (LM139)

• Common-Mode Input Voltage Range Includes Ground

• Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ±36 V

• Low Supply-Current Drain Independent of Supply Voltage: 0.4 mA (Typical) Per Comparator

Applications

• Industrial Applications

• Battery-Powered Applications