ST POWERSTEP01TR

Привод - полностью интегрированный, ступень управления и питания10A3,3 В, 5 В

Overview

The POWERSTEP01TR is a system-in-package integrating 8 N-channel 16 mΩ MOSFETs for stepper applications up to 85 V with an SPI programmable controller, providing a full digital control of the motion through a speed profile generation and positioning calculations.

It integrates a dual low RDS(on) full-bridge with embedded non-dissipative overcurrent protection. The device can operate with both voltage mode driving and advanced current control fitting different application needs. The digital control core can generate user’s defined motion profiles with acceleration, deceleration, speed or a target position easily programmed through a dedicated register set. All application commands and data registers, including those used to set analog values (i.e. current protection trip point, dead time, PWM frequency, etc.) are sent through a standard 5-Mbit/s SPI. A very rich set of protections (thermal, low bus voltage, overcurrent and motor stall) make the POWERSTEP01TR “bullet proof”, as required by the most demanding motor control applications.

Features

POWERSTEP01TR MOSFET is a N-channel MOSFET. POWERSTEP01TR N-channel MOSFET is designed to support stepper applications up to 85 V with an SPI programmable controller. It offers an entire digital control of the motion through a speed profile generation and positioning calculations. POWERSTEP01TR STMicroelectronics is ideal for Low Side Load Switch, Li-Ion Battery Supplied Devices, Buck Converters, and Level Shifts.

Applications

Programmable protection

Sensorless stall detection

Integrated voltage regulators

Low quiescent standby currents

SPI interface

POWERSTEP01TR Applications

Low Side Load Switch

Li-Ion Battery Supplied Devices

Buck Converters

Level Shifts