ST SG3525AP

Шаг вниз, шаг вверх/шаг внизBuck, Push-Pull8 В ~ 35 В

Overview

The SG3525AP is a regulating pulse width Modulator IC is designed to offer improved performance and lowered external parts count when used in designing all types of switching power supplies. The on-chip 5.1V reference is trimmed to ±1% and the input common-mode range of the error amplifier includes the reference voltage eliminating external resistors. A synchronized input to the oscillator allows multiple units to be slaved or a single unit to be synchronized to an external system clock. A single resistor between the CT and the discharge terminals provide a wide range of dead time adjustment. This device also features built-in soft-start circuitry with only an external timing capacitor required. A shutdown terminal controls both the soft-start circuitry and the output stages, providing instantaneous turn OFF through the PWM latch with pulsed shutdown, as well as soft-start recycle with longer shutdown commands.

Features

Tube Package
Transistor Driver Output Type
Positive Output Configuration
2 Number of Outputs
1 Output Phases
8V ~ 35V Voltage - Supply (Vcc/Vdd)
100Hz ~ 400kHz Frequency - Switching
49% Duty Cycle (Max)
Yes Synchronous Rectifier
Yes Clock Sync
Enable, Soft Start Control Features
0°C ~ 70°C (TA) Operating Temperature
Surface Mount Mounting Type