ST ST72F324K6T6

ST78 МГц32 КБ (32К x 8)

Overview

The ST72F324K6B6 is IC MCU 8BIT 32KB FLASH 32SDIP, that includes ST7 Series, they are designed to operate with a Tube Packaging, Unit Weight is shown on datasheet note for use in a 0.078125 oz, that offers Mounting Style features such as Through Hole, Package Case is designed to work in 32-SDIP (0.400", 10.16mm), it has an Operating Temperature range of -40°C ~ 85°C (TA), the device can also be used as 24 Number of I O. In addition, the Speed is 8MHz, the device is offered in Core Processor, the device has a 1K x 8 of RAM Size, and Program Memory Type is FLASH, and the Peripherals is LVD, POR, PWM, WDT, and Connectivity is SCI, SPI, and the Voltage Supply Vcc Vdd is 3.8 V ~ 5.5 V, and Core Size is 8-Bit, and the Program Memory Size is 32KB (32K x 8), and Data Converters is A/D 8x10b, and the Oscillator Type is Internal, it has an Maximum Operating Temperature range of + 85 C, it has an Minimum Operating Temperature range of - 40 C, and Interface Type is SCI SPI, and the Core is ST7, and Data Bus Width is 8 bit, and the Supply Voltage Max is 5.5 V, and Supply Voltage Min is 3.8 V, and the Maximum Clock Frequency is 8 MHz, and Number of ADC Channels is 12, and the Number of I Os is 32 I/O, and Data RAM Size is 1 kB, and the Number of Timers Counters is 2 Timer, and ADC Resolution is 10 bit.

ST72F324K6T3 with circuit diagram manufactured by ST. The ST72F324K6T3 is available in QFP Package, is part of the IC Chips.

Features

• Memories 8 to 32K dual voltage High-Density Flash (HDFlash) with read-out protection capability. In-Application Programming and In-Circuit Programming for HDFlash devices 384 to 1K bytes RAM HDFlash endurance: 100 cycles, data retention: 20 years at 55°C

• Clock, Reset And Supply Management Enhanced low voltage supervisor (LVD) for main supply with programmable reset thresholds and auxiliary voltage detector (AVD) with interrupt capability Clock sources: crystal/ceramic resonator oscillators, internal RC oscillator, clock security system and bypass for external clock PLL for 2x frequency multiplication Four Power Saving Modes: Halt, Active-Halt, Wait and Slow

• Interrupt Management Nested interrupt controller 10 interrupt vectors plus TRAP and RESET 9/6 external interrupt lines (on 4 vectors)

• Up to 32 I/O Ports 32/24 multifunctional bidirectional I/O lines 22/17 alternate function lines 12/10 high sink outputs

• 4 Timers Main Clock Controller with Real-time base, Beep and Clock-out capabilities Configurable watchdog timer 16-bit Timer A with 1 input capture, 1 output compare, external clock input, PWM and pulse generator modes 16-bit Timer B with 2 input captures, 2 output compares, PWM and pulse generator modes

• 2 Communication Interfaces SPI synchronous serial interface SCI asynchronous serial interface

• 1 Analog Peripheral (low current coupling) 10-bit ADC with up to 12 robust input ports

• Instruction Set 8-bit Data Manipulation 63 Basic Instructions 17 main Addressing Modes 8 x 8 Unsigned Multiply Instruction

• Development Tools Full hardware/software development package In-Circuit Testing capability

Applications

• Industrial Applications

• Mid-range Applications