ST ST7FLITE09Y0B6

ST78 МГц1,5 КБ (1,5K x 8)

Overview

The ST7FLITE09M6TR is IC MCU 8BIT 1.5KB FLASH 16SOIC, that includes ST7 Series, they are designed to operate with a MCU Product, Packaging is shown on datasheet note for use in a Tape & Reel (TR), that offers Package Case features such as 16-SOIC (0.154", 3.90mm Width), it has an Operating Temperature range of -40°C ~ 85°C (TA), as well as the 16-SO Supplier Device Package, the device can also be used as 13 Number of I O. In addition, the Speed is 8MHz, the device is offered in 128 x 8 EEPROM Size, the device has a ST7 of Core Processor, and RAM Size is 128 x 8, and the Program Memory Type is FLASH, and Peripherals is LVD, POR, PWM, WDT, and the Connectivity is SPI, and Voltage Supply Vcc Vdd is 2.4 V ~ 5.5 V, and the Core Size is 8-Bit, and Program Memory Size is 1.5KB (1.5K x 8), and the Data Converters is A/D 5x8b, and Oscillator Type is Internal, and the Core is ST7, and Processor Series is ST7FLITE0x, and the Data Bus Width is 8 bit.

ST7FLITE09OBR 3 with circuit diagram manufactured by ST. The ST7FLITE09OBR 3 is available in SOP-16 Package, is part of the IC Chips.

Features

• 1 Communication Interface

– SPI synchronous serial interface

• A/D Converter

– 8-bit resolution for 0 to VDD

– Fixed gain Op-amp for 11-bit resolution in 0 to 250 mV range (@ 5V VDD)

– 5 input channels

• Instruction Set

– 8-bit data manipulation

– 63 basic instructions with illegal opcode detection

– 17 main addressing modes

– 8 x 8 unsigned multiply instruction

• Development Tools

– Full hardware/software development package

• Memories

– 1K or 1.5 Kbytes single voltage Flash Program memory with read-out protection, In-Circuit and In-Application Programming (ICP and IAP). 10 K write/erase cycles guaranteed, data retention: 20 years at 55 °C.

– 128 bytes RAM.

– 128 bytes data EEPROM with read-out protection. 300K write/erase cycles guaranteed, data retention: 20 years at 55 °C.

• Clock, Reset and Supply Management

– 3-level low voltage supervisor (LVD) and aux- iliary voltage detector (AVD) for safe power- on/off procedures

– Clock sources: internal 1MHz RC 1% oscillator or external clock

– PLL x4 or x8 for 4 or 8 MHz internal clock

– Four Power Saving Modes: Halt, Active-Halt, Wait and Slow

• Interrupt Management

– 10 interrupt vectors plus TRAP and RESET

– 4 external interrupt lines (on 4 vectors)

• I/O Ports

– 13 multifunctional bidirectional I/O lines

– 9 alternate function lines

– 6 high sink outputs

• 2 Timers

– One 8-bit Lite Timer (LT) with prescaler including: watchdog, 1 realtime base and 1 input capture.

– One 12-bit Auto-reload Timer (AT) with output compare function and PWM

Applications

• Automobile engine control systems

• Implantable medical devices

• Remote controls

• Office machines

• Appliances