ST STM32F302VDT6

ARM® Cortex®-M472 МГц384 КБ (384 КБ x 8)

Overview

The STM32F302xD/E family is based on the high-performance ARM®Cortex®-M4 32-bit RISC core with FPU operating at a frequency of 72 MHz, and embedding a floating point unit (FPU), a memory protection unit (MPU) and an embedded trace macrocell (ETM). The family incorporates high-speed embedded memories (512-Kbyte Flash memory, 64-Kbyte SRAM), a flexible memory controller (FSMC) for static memories (SRAM, PSRAM, NOR and NAND), and an extensive range of enhanced I/Os and peripherals connected to an AHB and two APB buses.

The devices offer two fast 12-bit ADCs (5 Msps), four comparators, two operational amplifiers, one DAC channel, a low-power RTC, up to two general-purpose 16-bit timers, one general-purpose 32-bit timer, and one timer dedicated to motor control. They also feature standard and advanced communication interfaces: up to three I2Cs, up to four SPIs (two SPIs are with multiplexed full-duplex I2Ss), three USARTs, up to two UARTs, CAN and USB. To achieve audio class accuracy, the I2S peripherals can be clocked via an external PLL. The STM32F302xD/E family operates in the -40 to +85°C and -40 to +105°C temperature ranges from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications. The STM32F302xD/E family offers devices in different packages ranging from 64 to 144 pins. Depending on the device chosen, different sets of peripherals are included.

Features

• 32kHz Oscillator for RTC with calibration

• 8MHz Internal RC with x 16 PLL option

• 40kHz Internal oscillator

• Interconnect matrix

• ARM Cortex-M4 CPU with FPU, single-cycle multiplication and HW division, DSP instruction and MPU

• CRC calculation unit

• Power-on/Power-down reset (POR/PDR)

• Programmable voltage detector (PVD)

• Low power modes - Sleep, stop, and standby

• VBAT supply for RTC and backup registers

• 4 to 32MHz Crystal oscillator

• USB 2.0 full-speed interface

• CAN interface (2.0B Active)

• Infrared transmitter

• 96-bit Unique ID

• 12-channel DMA Controller

• 2 x Watchdog timers (Independent and window)

• SysTick Timer

• 16-bit Basic timer to drive the DAC

• Calendar RTC with alarm, periodic wakeup from Stop/Standby

Applications

• Home Appliance Manufacturers

• Motor Control

• Rectification

• Power RegulationInstrumentation Industry