ST STM32F446ZCJ6

ARM® Cortex®-M4180 МГц256 КБ (256К x 8)

Overview

The STM32F446xC/E devices are based on the high-performance Arm® Cortex®-M4 32-bit RISC core operating at a frequency of up to 180 MHz. The Cortex-M4 core features a floating point unit (FPU) single precision supporting all Arm® single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) that enhances application security.

The STM32F446xC/E devices incorporate high-speed embedded memories (Flash memory up to 512 Kbytes, up to 128 Kbytes of SRAM), up to 4 Kbytes of backup SRAM, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix. All devices offer three 12-bit ADCs, two DACs, a low-power RTC, twelve general-purpose 16-bit timers including two PWM timers for motor control, two general-purpose 32-bit timers. They also feature standard and advanced communication interfaces.

Features

· Core: Arm? 32-bit Cortex?-M4 CPU with FPU,

Adaptive real-time accelerator (ART

Accelerator) allowing 0-wait state execution

from Flash memory, frequency up to 180 MHz,

MPU, 225 DMIPS/1.25 DMIPS/MHz

(Dhrystone 2.1), and DSP instructions

· Memories

– 512 Kbytes of Flash memory

– 128 Kbytes of SRAM

– Flexible external memory controller with up

to 16-bit data bus: SRAM, PSRAM,

SDRAM/LPSDR SDRAM, NOR/NAND

Flash memories

– Dual mode QuadSPI interface

· LCD parallel interface, 8080/6800 modes

· Clock, reset and supply management

– 1.7 V to 3.6 V application supply and I/Os

– POR, PDR, PVD and BOR

– 4 to 26 MHz crystal oscillator

– Internal 16 MHz factory-trimmed RC (1%

accuracy)

– 32 kHz oscillator for RTC with calibration

– Internal 32 kHz RC with calibration

· Low power

– Sleep, Stop and Standby modes

– VBAT supply for RTC, 20×32 bit backup

registers plus optional 4 KB backup SRAM

· 3× 12-bit, 2.4 MSPS ADC: up to 24 channels

and 7.2 MSPS in triple interleaved mode

· 2× 12-bit D/A converters

· General-purpose DMA: 16-stream DMA

controller with FIFOs and burst support

· Up to 17 timers: 2x watchdog, 1x SysTick timer

and up to twelve 16-bit and two 32-bit timers up

to 180 MHz, each with up to four IC/OC/PWM

or pulse counter

· Debug mode

– SWD and JTAG interfaces

– Cortex?-M4 Trace Macrocell?

Applications

These features make the STM32F446xC/E microcontrollers suitable for a wide range of

applications, namely motor drive and control, medical equipment, industrial (PLC, inverters,

circuit breakers), printers, and scanners, alarm systems, video intercom and HVAC, and

home audio appliances.