ST STM32L451RCT6

ARM® Cortex®-M480 МГц256 КБ (256К x 8)

Overview

The STM32L451xx devices are the ultra-low-power microcontrollers based on the high-performance Arm® Cortex®-M4 32-bit RISC core operating at a frequency of up to 80 MHz. The Cortex-M4 core features a Floating point unit (FPU) single precision which supports all Arm® single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.

The STM32L451xx devices embed high-speed memories (Flash memory up to 512 Kbyte, 160 Kbyte of SRAM), a Quad SPI flash memories interface (available on all packages) and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix. The STM32L451xx devices embed several protection mechanisms for embedded Flash memory and SRAM: readout protection, write protection, proprietary code readout protection and Firewall. The devices offer a fast 12-bit ADC (5 Msps), two comparators, one operational amplifier, one DAC channel, an internal voltage reference buffer, a low-power RTC, one general-purpose 32-bit timer, one 16-bit PWM timer dedicated to motor control, four general-purpose 16-bit timers, and two 16-bit low-power timers. In addition, up to 21 capacitive sensing channels are available. They also feature standard and advanced communication interfaces. The STM32L451xx operates in the -40 to +85 °C (+105 °C junction) and -40 to +125 °C (+130 °C junction) temperature ranges from a 1.71 to 3.6 V power supply. A comprehensive set of power-saving modes allows the design of low-power applications. Some independent power supplies are supported: analog independent supply input for ADC, DAC, OPAMP and comparators. A VBAT input allows to backup the RTC and backup registers. The STM32L451xx family offers six packages from 48 to 100-pin packages.

Features

• 1.71 V to 3.6 V power supply

•  -40 °C to 85/125 °C temperature range

• 145 nA in VBAT mode: supply for RTC and

• 32x32-bit backup registers

• 22 nA Shutdown mode (5 wakeup pins)

• 106 nA Standby mode (5 wakeup pins)

• 375 nA Standby mode with RTC

• 2.05 μA Stop 2 mode, 2.40 μA with RTC

• 84 μA/MHz run mode

• Batch acquisition mode (BAM)

• 4 μs wakeup from Stop mode

• Brown out reset (BOR)

• Interconnect matrix

Applications

• ADC

• DAC

• OPAMP 

• Comparators