Xilinx XC7Z100-2FFG900I

MCU, FPGAДвойной ARM® Cortex®-A9 MPCore™ с CoreSight™256 КБDMACANbus, EBI/EMI, Ethernet, I²C, MMC/SD/SDIO, SPI, UART/USART, USB OTG800 МГц

Overview

The Zynq®-7000 family is based on the Xilinx SoC architecture. These products integrate a feature-rich dual-core or single-core ARM® Cortex™-A9 based processing system (PS) and 28 nm Xilinx programmable logic (PL) in a single device. The ARM Cortex-A9 CPUs are the heart of the PS and also include on-chip memory, external memory interfaces, and a rich set of peripheral connectivity interfaces.● Application Processor Unit (APU)• 2.5 DMIPS/MHz per CPU• CPU frequency: Up to 1 GHz• Coherent multiprocessor support• ARMv7-A architecture- TrustZone® security- Thumb®-2 instruction set• Jazelle® RCT execution Environment Architecture• NEON™ media-processing engine• Single and double precision Vector Floating Point Unit (VFPU)• CoreSight™ and Program Trace Macrocell (PTM)• Timer and Interrupts- Three watchdog timers- One global timer- Two triple-timer counters● Caches• 32 KB Level 1 4-way set-associative instruction and data caches(independent for each CPU)• 512 KB 8-way set-associative Level 2 cache (shared between the CPUs)• Byte-parity support● On-Chip Memory• On-chip boot ROM• 256 KB on-chip RAM (OCM)• Byte-parity support● External Memory Interfaces• Multiprotocol dynamic memory controller• 16-bit or 32-bit interfaces to DDR3, DDR3L, DDR2, or LPDDR2 memories• ECC support in 16-bit mode• 1GB of address space using single rank of 8-, 16-, or 32-bit-wide memories• Static memory interfaces- 8-bit SRAM data bus with up to 64 MB support- Parallel NOR flash support- ONFI1.0 NAND flash support (1-bit ECC)- 1-bit SPI, 2-bit SPI, 4-bit SPI (quad-SPI), or two quad-SPI (8-bit) serial NOR flash● 8-Channel DMA Controller• Memory-to-memory, memory-to-peripheral, peripheral-to-memory, and scatter-gather transaction support● I/O Peripherals and Interfaces• Two 10/100/1000 tri-speed Ethernet MAC peripherals with IEEE Std 802.3 and IEEE Std 1588 revision 2.0 support- Scatter-gather DMA capability- Recognition of 1588 rev. 2 PTP frames- GMII, RGMII, and SGMII interfaces• Two USB 2.0 OTG peripherals, each supporting up to 12 Endpoints- USB 2.0 compliant device IP core- Supports on-the-go, high-speed, full-speed, and low-speed modes- Intel EHCI compliant USB host- 8-bit ULPI external PHY interface• Two full CAN 2.0B compliant CAN bus interfaces- CAN 2.0-A and CAN 2.0-B and ISO 118981-1 standard compliant- External PHY interface• Two SD/SDIO 2.0/MMC3.31 compliant controllers• Two full-duplex SPI ports with three peripheral chip selects• Two high-speed UARTs (up to 1 Mb/s)• Two master and slave I2C interfaces• GPIO with four 32-bit banks, of which up to 54 bits can be used with the PS I/O (one bank of 32b and one bank of 22b) and        up to 64 bits (up to two banks of 32b) connected to the Programmable Logic• Up to 54 flexible multiplexed I/O (MIO) for peripheral pin assignments● Interconnect• High-bandwidth connectivity within PS and between PS and PL• ARM AMBA® AXI based• QoS support on critical masters for latency and bandwidth control

Features

Applications

• High-end PLC
• Vending machines
• POS Terminals
• Measurement tools
• Measurement testers
• Networked sensors
• Robotics
• Central alarm system
• Smart appliances
• Industrial automation devices