NXP LPC822M101JDH20J

ARM® Cortex®-M0+30 МГц16 КБ (16К x 8)

Overview

The LPC822M101JDH20J is a 32-bit ARM Cortex-M0+ Microcontroller operating at CPU frequencies of up to 30MHz. The LPC82x support up to 32kB of flash memory and 8kB of SRAM. The peripheral complement of the LPC82x includes a CRC engine, four I²C-bus interfaces, up to three USARTs, up to two SPI interfaces, one multi-rate timer, self-wake-up timer and state-configurable timer with PWM function (SCTimer/PWM), a DMA, one 12-bit ADC and one analog comparator, function-configurable I/O ports through a switch matrix, an input pattern match engine and up to 29 general-purpose I/O pins. State configurable timer (SCTimer/PWM) with input and output functions (including capture and match) for timing and PWM applications. Each SCTimer/PWM input is multiplexed to allow selecting from several input sources such as pins, ADC interrupt or comparator output.

Features

• Unique device serial number for identification.

• Single power supply (1.8 V to 3.6 V).

• Operating temperature range -40 °C to +105 °C.

• Available in a TSSOP20 and HVQFN33 (5x5) package.

• Up to 32 KB on-chip flash programming memory with 64 Byte page write and erase. Code Read Protection (CRP) supported.

• 8 KB SRAM.

• ARM Cortex-M0+ processor (revision r0p1), running at frequencies of up to 30 MHz with single-cycle multiplier and fast single-cycle I/O port.

• ARM Cortex-M0+ built-in Nested Vectored Interrupt Controller (NVIC).

• System tick timer.

• AHB multilayer matrix.

• Serial Wire Debug (SWD) with four break points and two watch points. JTAG

• boundary scan (BSDL) supported.

• MTB.

Applications

• Sensor gateways 

• Simple motor control

• Industrial 

• Portables and wearables

• Gaming controllers 

• Lighting

• 8/16-bit applications 

• Motor control

• Consumer 

• Fire and security applications

• Climate control