NXP MC9S08JM60CLH

S0848 МГц60 КБ (60К x 8)

Overview

The MC9S08JM60CLH is a 8-bit Application-specific Microcontroller based on enhanced HCS08 CPU (24MHz bus) with CISC architecture operates at a maximum frequency of 48MHz. The device incorporates 60kB internal flash, 4kB internal RAM, an analog comparator, 12-channel 12-bit A/D converter and 51 general-purpose I/O pins. This device also features peripherals like USB 2.0 full-speed (12Mbps) device controller, one inter-integrated circuit (IIC) bus module to operate at up to 100kbps, two serial peripheral interface modules (SPI), two serial communications interface (SCI) modules and real-time counter (RTC). Breakpoint capability to allow single breakpoint setting during in-circuit debugging (plus two more breakpoints in on-chip debug module). In-circuit emulator (ICE) debug module containing two comparators and nine trigger modes. Eight deep FIFO for storing change-of-flow addresses and event-only data. Debug module supports both tag and force breakpoints.

Features

8-Bit HCS08 Central Processor Unit (CPU)

? 48 MHz HCS08 CPU (central processor unit)

? 24 MHz internal bus frequency

? HC08 instruction set with added BGND instruction

? Background debugging system

? Breakpoint capability to allow single breakpoint

setting during in-circuit debugging (plus two more

breakpoints in on-chip debug module)

? In-circuit emulator (ICE) debug module containing

two comparators and nine trigger modes. Eight

deep FIFO for storing change-of-flow addresses

and event-only data. Debug module supports both

tag and force breakpoints

? Support for up to 32 interrupt/reset sources

Memory Options

? Up to 16 KB of on-chip in-circuit programmable

flash memory with block protection and security

options

? Up to 1 KB of on-chip RAM

? 256 bytes of USB RAM

Clock Source Options

? Clock source options include crystal, resonator,

external clock

? MCG (multi-purpose clock generator) — PLL and

FLL; internal reference clock with trim adjustment

System Protection

? Optional computer operating properly (COP) reset

with option to run from independent 1 kHz internal

clock source or the bus clock

? Low-voltage detection with reset or interrupt

? Illegal opcode detection with reset

? Illegal address detection with reset

Power-Saving Modes

? Wait plus two stops

Applications

? Motor drive and application control,

? Medical equipment,

? Industrial applications: PLC, inverters, circuit breakers,

? Printers, and scanners