What is Surface Mount?

Surface mount technology (SMT) involves mounting electronic components directly onto the surface of a printed circuit board (PCB). This technique eliminates the need for drilling holes and allows for more compact and efficient designs.

What is the Operating Temperature?

The operating temperature is the range of ambient temperatures within which a power supply, or any other electrical equipment, can operate reliably. This range spans from a minimum to a maximum temperature, outside of which the equipment may not function correctly.

Semiconductor packaging refers to the protective shell that encases one or more semiconductor components or integrated circuits. The shell material can be metal, plastic, glass, or ceramic.

Part status refers to the various stages a part goes through during its lifecycle, including configuration, analysis, review, and approval stages.

What is Terminal Form?

Terminal form refers to the shape and configuration of the terminals of a component, which are designed for connection to a circuit.

What is Terminal Pitch?

Terminal pitch is the center-to-center distance between adjacent terminals of a component.

What is the Max Supply Voltage?

The maximum supply voltage is the highest voltage that can be safely applied to a device. Exceeding this voltage can result in damage or failure of the device.

What is the Min Supply Voltage?

The minimum supply voltage is the lowest voltage at which a device can operate correctly. Operating below this voltage may cause the device to malfunction.

What is the Nominal Supply Current?

The nominal supply current is the current a device draws under normal operating conditions when delivering its rated output.

What is Quiescent Current?

Quiescent current is the current drawn by a device when it is in a no-load or idle state, with no active signal processing.

What is a Synchronous Rectifier?

A synchronous rectifier is a type of rectifier that uses actively controlled switches, such as MOSFETs or BJTs, to improve efficiency by reducing voltage drops and power loss compared to traditional diodes.

RoHS stands for 'Restriction of Hazardous Substances.' It refers to regulations that limit the use of specific hazardous materials in electrical and electronic equipment.

What is a Microcontroller?

A microcontroller is a compact integrated circuit designed to govern a specific operation in an embedded system. It typically includes a processor, memory, and input/output peripherals on a single chip.

What is an Integrated Circuit?

An integrated circuit (IC) is a set of electronic circuits on a small flat piece of semiconductor material, usually silicon. ICs are used in virtually all electronic equipment today and have revolutionized the world of electronics.

What is the Clock Speed?

Clock speed refers to the speed at which a microprocessor executes instructions, typically measured in megahertz (MHz) or gigahertz (GHz). Higher clock speeds mean the processor can perform more instructions per second.

Die size refers to the physical dimensions of a single piece of semiconductor material, or die, that has been cut from a larger wafer. The size of the die is an important factor in the cost and performance of semiconductor devices.

What is a Transistor?

A transistor is a semiconductor device used to amplify or switch electronic signals and electrical power. It is one of the basic building blocks of modern electronic devices.

EEPROM stands for Electrically Erasable Programmable Read-Only Memory. It is a type of non-volatile memory used in computers and other electronic devices to store small amounts of data that must be saved when power is removed.

A chipset is a group of integrated circuits designed to work together to manage data flow between the processor, memory, and peripherals in a computer or other electronic device.

What is a Logic Gate?

A logic gate is a fundamental building block of a digital circuit. It performs a basic logical function such as AND, OR, or NOT, based on its input signals.

A DSP, or Digital Signal Processor, is a specialized microprocessor designed specifically for processing digital signals in real time. It is used in applications such as audio signal processing, telecommunications, and digital image processing.

FPGA stands for Field-Programmable Gate Array. It is an integrated circuit that can be configured by the customer or designer after manufacturing, allowing for flexible and reprogrammable designs.

NXP MC9S08MM64CLH
S0848 МГц64 КБ (64К x 8)

Name: MC9S08MM64CLH
Brand: NXP USA Inc.
Price: 626.09 USD
Availability: InStock
Rating: 5 (47 reviews)

Сравнить

ПроизводительNXP USA Inc.

Номер продукта производителяMC9S08MM64CLH

ОписаниеIC MCU 8BIT 64KB FLASH 64LQFP

Техническое описание MC9S08MM64CLH Техническое описание(pdf)

Оплата

Доставка

Сравнить

₽626.09

Обновление цены：несколько месяцев назад

Количество доступных: заказ по расписанию

Гарантия качества Bostock

NXP USA Inc.

NXP USA Inc. является американским филиалом компании NXP Semiconductors, которая занимается проектированием, разработкой, производством и продажей полупроводниковой продукции. Компания специализируется на производстве полупроводниковых пластин в Остине (штат Техас) и Чандлере (штат Аризона) и выпускает высокопроизводительные решения для автомобильного, промышленного и коммуникационного рынков.