NXP MC9S08PT60VQH

S0820 МГц60 КБ (60К x 8)

Overview

The MC9S08PT60VLD is IC MCU 8BIT 60KB FLASH 44LQFP, that includes S08 Series, they are designed to operate with a Tray Packaging, Package Case is shown on datasheet note for use in a 44-LQFP, it has an Operating Temperature range of -40°C ~ 105°C (TA), Supplier Device Package is designed to work in 44-LQFP (10x10), as well as the 37 Number of I O, the device can also be used as 20MHz Speed. In addition, the EEPROM Size is 256 x 8, the device is offered in S08 Core Processor, the device has a 4K x 8 of RAM Size, and Program Memory Type is FLASH, and the Peripherals is LVD, POR, PWM, WDT, and Connectivity is I2C, LIN, SPI, UART/USART, and the Voltage Supply Vcc Vdd is 2.7 V ~ 5.5 V, and Core Size is 8-Bit, and the Program Memory Size is 60KB (60K x 8), and Data Converters is A/D 16x12b, and the Oscillator Type is Internal.

The MC9S08PT60VLF is IC MCU 8BIT 60KB FLASH 48LQFP, that includes I2C, LIN, SPI, UART/USART Connectivity, they are designed to operate with a S08 Core Processor, Core Size is shown on datasheet note for use in a 8-Bit, that offers Data Converters features such as A/D 16x12b, EEPROM Size is designed to work in 256 x 8, as well as the 41 Number of I O, it has an Operating Temperature range of -40°C ~ 105°C (TA). In addition, the Oscillator Type is Internal, the device is offered in 48-LQFP Package Case, the device has a Tray of Packaging, and Peripherals is LVD, POR, PWM, WDT, and the Program Memory Size is 60KB (60K x 8), and Program Memory Type is FLASH, and the RAM Size is 4K x 8, and Series is S08, and the Speed is 20MHz, and Supplier Device Package is 48-LQFP (7x7), and the Voltage Supply Vcc Vdd is 2.7 V ~ 5.5 V.

Features

• Increased flash/RAM ratio (4 KB RAM in PT/PA60)

• On-chip EEPROM with 500K~1M write/erase cycle

• Up top 57 GPIO with filtering in 64-pin

• Up to eight pins with 20 mA sink drive capability

• Two pins with true open drain

• Dedicated hardware module to sense touch input, minimum software intervention

• Functional in all power modes (run, wait and low-powertop), wake up capable of stop

• Designed for operation in harsh environments with high sensitivity

• Highly configurable through hardware and software

• 6-ch. + 2-ch. + 2-ch. FlexTimer: 2 x MTIM

• Real-time counter

• 3 x SCI, 2 x SPI, I2C

• Enhanced watchdog and programmable CRC

• High accuracy internal clock

Applications

• Industrial 

• Environment Applications