NXP MC9S08SH8CTJR

S0840 МГц8 КБ (8К x 8)

Overview

The MC9S08SH8CTGR is IC MCU 8BIT 8KB FLASH 16TSSOP, that includes S08 Series, they are designed to operate with a Digi-ReelR Alternate Packaging Packaging, Unit Weight is shown on datasheet note for use in a 0.002194 oz, that offers Mounting Style features such as SMD/SMT, Package Case is designed to work in 16-TSSOP (0.173", 4.40mm Width), it has an Operating Temperature range of -40°C ~ 85°C (TA), the device can also be used as 16-TSSOP Supplier Device Package. In addition, the Number of I O is 13, the device is offered in 40MHz Speed, the device has a S08 of Core Processor, and RAM Size is 512 x 8, and the Program Memory Type is FLASH, and Peripherals is LVD, POR, PWM, WDT, and the Connectivity is I2C, LIN, SCI, SPI, and Voltage Supply Vcc Vdd is 2.7 V ~ 5.5 V, and the Core Size is 8-Bit, and Program Memory Size is 8KB (8K x 8), and the Data Converters is A/D 8x10b, and Oscillator Type is Internal, it has an Maximum Operating Temperature range of + 85 C, it has an Minimum Operating Temperature range of - 40 C, and the Operating Supply Voltage is 2.7 V to 5.5 V, and Interface Type is SCI SPI, and the Core is S08, and Processor Series is MC9S08, and the Data Bus Width is 8 bit, and Supply Voltage Max is 5.5 V, and the Supply Voltage Min is 2.7 V, and Maximum Clock Frequency is 40 MHz, and the Number of ADC Channels is 12, and Number of I Os is 13 I/O, and the Data RAM Size is 512 B, and Data ROM Size is 8 kB, and the Number of Timers Counters is 1 Timer, and ADC Resolution is 10 bit, and the Data RAM Type is 512 B, and Data ROM Type is Flash.

The MC9S08SH8CTG is IC MCU 8BIT 8KB FLASH 16TSSOP, that includes 10 bit ADC Resolution, they are designed to operate with a I2C, LIN, SCI, SPI Connectivity, Core is shown on datasheet note for use in a S08, that offers Core Processor features such as S08, Core Size is designed to work in 8-Bit, as well as the 8 bit Data Bus Width, the device can also be used as A/D 8x10b Data Converters. In addition, the Data RAM Size is 512 B, the device is offered in I2C SCI SPI Interface Type, the device has a 40 MHz of Maximum Clock Frequency, it has an Maximum Operating Temperature range of + 85 C, it has an Minimum Operating Temperature range of - 40 C, and Mounting Style is SMD/SMT, and the Number of ADC Channels is 12, and Number of I O is 13, and the Number of I Os is 13 I/O, and Number of Timers Counters is 2 Timer, and the Operating Supply Voltage is 5.5 V, it has an Operating Temperature range of -40°C ~ 85°C (TA), and the Oscillator Type is Internal, and Package Case is 16-TSSOP (0.173", 4.40mm Width), and the Packaging is Tube Alternate Packaging, and Peripherals is LVD, POR, PWM, WDT, and the Processor Series is MC9S08, and Product is MCU, and the Program Memory Size is 8KB (8K x 8), and Program Memory Type is FLASH, and the RAM Size is 512 x 8, and Series is S08, and the Speed is 40MHz, and Supplier Device Package is 16-TSSOP, and the Supply Voltage Max is 5.5 V, and Supply Voltage Min is 2.7 V, and the Unit Weight is 0.002194 oz, and Voltage Supply Vcc Vdd is 2.7 V ~ 5.5 V.

Features

Peripherals

• ADC — 12-channel, 10-bit resolution, 2.5 μs conversion time, automatic compare function, temperature sensor, internal bandgap reference channel; runs in stop3

• ACMP — Analog comparator with selectable interrupt on rising, falling, or either edge of comparator output; compare option to fixed internal bandgap reference voltage; output can be optionally routed to TPM module; runs in stop3

• SCI — Full duplex non-return to zero (NRZ); LIN master extended break generation; LIN slave extended break detection; wake up on active edge

• SPI — Full-duplex or single-wire bidirectional; Double-buffered transmit and receive; Master or Slave mode; MSB-first or LSB-first shifting

• IIC — Up to 100 kbps with maximum bus loading; Multi-master operation; Programmable slave address; Interrupt driven byte-by-byte data transfer; supports broadcast mode and 10-bit addressing

• MTIM — 8-bit modulo counter with 8-bit prescaler and overflow interrupt

• TPMx — Two 2-channel timer pwm modules (TPM1, TPM2); Selectable input capture, output compare, or buffered edge- or center-aligned PWM on each channel

• RTC — (Real-time counter) 8-bit modulus counter with binary or decimal based prescaler; External clock source for precise time base, time-of-day, calendar or task scheduling functions; Free running on-chip low power oscillator (1 kHz) for cyclic wake-up without external components, runs in all MCU modes

Input/Output

• 17 general purpose I/O pins (GPIOs) and 1 output-only pin

• 8 interrupt pins with selectable polarity

• Ganged output option for PTB[5:2] and PTC[3:0]; allows single write to change state of multiple pins

• Hysteresis and configurable pull up device on all input pins; Configurable slew rate and drive strength on all output pins.

Package Options

• 24-QFN, 20-TSSOP, 20-SOIC, 20-PDIP, 16-TSSOP, 8-SOIC

8-Bit HCS08 Central Processor Unit (CPU)

• 40-MHz HCS08 CPU (central processor unit)

• HC08 instruction set with added BGND instruction

• Support for up to 32 interrupt/reset sources

On-Chip Memory

• FLASH read/program/erase over full operating voltage and temperature

• Random-access memory (RAM)

Power-Saving Modes

• Two very low power stop modes

• Reduced power wait mode

• Very low power real time interrupt for use in run, wait, and stop

Clock Source Options

• Oscillator (XOSC) — Loop-control Pierce oscillator; Crystal or ceramic resonator range of 31.25 kHz to 38.4 kHz or 1 MHz to 16 MHz

• Internal Clock Source (ICS) — Internal clock source module containing a frequency-locked loop (FLL) controlled by internal or external reference; precision trimming of internal reference allows 0.2% resolution and 2% deviation over temperature and voltage; supports bus frequencies from 2 MHz to 20 MHz.

System Protection

• Watchdog computer operating properly (COP) reset with opti/n to run from dedicated 1-kHz internal clock source or bus clock

• Low-voltage detection with reset or interrupt; selectable trip points

• Illegal opcode detection with reset

• Illegal address detection with reset

• FLASH block protect

Development Support

• Single-wire background debug interface

• Breakpoint capability to allow single breakpoint setting during in-circuit debugging (pluss two more breakpoints in on-chip debug module)

• On-chip, in-circuit emulation (ICE) debug module containing two comparators and nine trigger modes. Eight deep FIFO for storing change-of-flow address and event-only data. Debug module supports both tag and force breakpoints.

Applications

• Consumer Electronics

• Power Management

• HVAC

• Building Automation