NXP MCF54415CMJ250

Coldfire V4250 МГц

Overview

The MCF5407FT162 is IC MCU 32BIT 208FQFP, that includes MCF540x Series, they are designed to operate with a Tray Packaging, Package Case is shown on datasheet note for use in a 208-BFQFP, it has an Operating Temperature range of 0°C ~ 70°C (TA), Supplier Device Package is designed to work in 208-FQFP (28x28), as well as the 16 Number of I O, the device can also be used as 162MHz Speed. In addition, the Core Processor is Coldfire V4, the device is offered in 4K x 8 RAM Size, the device has a ROMless of Program Memory Type, and Peripherals is DMA, WDT, and the Connectivity is EBI/EMI, I2C, UART/USART, and Voltage Supply Vcc Vdd is 1.65 V ~ 3.6 V, and the Core Size is 32-Bit, and Oscillator Type is External.

The MCF5407FT16 is IC MCU 32BIT ROMLESS 208FQFP manufactured by FREESCALE. The MCF5407FT16 is available in 208-BFQFP Package, is part of the Embedded - Microcontrollers, , and with support for IC MCU 32BIT ROMLESS 208FQFP.

Features

• Enhanced Secure Digital host controller for SD, SDHC, SDIO, MMC, and MMCplus cards

• Two ISO7816 smart card interfaces

• Two FlexCAN modules

• Six I2C bus interfaces with DMA support in master mode

• Two synchronous serial interfaces

• Four 32-bit timers with DMA support

• Four programmable interrupt timers

• 8-channel, 16-bit motor control PWM timer

• Dual 12-bit ADCs with shared input channels and multiple conversion trigger sources

• Dual 12-bit DACs with DMA support

• 1-wire module with DMA support

• NAND flash controller

• Real-time clock with 32-kHz oscillator, 2 KB standby SRAM, and battery backup supply input

• Up to four DMA-supported serial peripheral interfaces (DSPI)

• Up to ten UARTs with single-wire mode support

• Up to five external IRQ interrupts and 2 external DMA request/acknowledge pairs

• Up to 16 processor local bus Rapid GPIO pins

• Up to 87 standard GPIO pins

• Version 4 ColdFire Core with EMAC and MMU

• Up to 385 Dhrystone 2.1 MIPS @ 250 MHz

• 8 KB instruction cache and 8 KB data cache

• 64 KB internal SRAM dual-ported to processor local bus and other crossbar switch masters

• System boot from NOR, NAND, SPI flash, EEPROM, or FRAM

• Crossbar switch technology (XBS) for concurrent access to peripherals or RAM from multiple bus masters

• 64-channel DMA controller

• SDRAM controller supporting full-speed operation from a single x8 DDR2 component up to 250 MHz

• 32-bit FlexBus external memory interface for RAM, ROM, MRAM, and programmable logic

• USB 2.0 host controller

• USB 2.0 host/device/On-the-Go controller

• 8-bit single data rate ULPI port usable by the dedicated USB host module or the USB host/device/OTG module

• Dual 10/100 Ethernet MACs with hardware CRC checking/generation, IEEE 1588-2002 support, and optional Ethernet switch

• CPU direct-attached hardware accelerator for DES, 3DES, AES, MD5, SHA-1, and SHA-256 algorithms

• Random number generator

Applications

• Automobile engine control systems

• Implantable medical devices

• Remote controls

• Office machines

• Appliances