NXP MK10DX256VLH7

ARM® Cortex®-M472 МГц256 КБ (256К x 8)

Overview

The MK10DX256VLH7 is a 32-bit Kinetis K1x Baseline Microcontroller based on ARM Cortex-M4 RISC architecture core operates at a maximum frequency of 72MHz. The device incorporates 288kB internal flash, 66kB internal RAM, 2kB EEPROM, two 16-bit SAR A/D converter, one 12-bit D/A converter and 44 general-purpose I/O pins. This device also features communication interfaces like three UART modules, one SPI module, two I2C modules and one I2S module.

Features

• Software watchdog

• Low-leakage wakeup unit

• Hardware CRC module to support fast cyclic redundancy checks

• 128-bit Unique identification (ID) number per chip

• Low-power hardware touch sensor interface (TSI)

• General-purpose input/output

• Three analogue comparators (CMP) containing a 6-bit DAC and programmable reference input

• Voltage reference

• Programmable delay block

• Eight channel motor control/general purpose/PWM timers

• Two 2-channel quadrature decoder/general purpose timers

• Periodic interrupt timers

• 16-bit Low-power timer

• Carrier modulator transmitter

• Real-time clock

• 3 to 32MHz Crystal oscillator

• Multi-purpose clock generator

• Multiple low-power modes to provide power optimization based on application requirements

• 16-channel DMA controller, supporting up to 128 request sources

• External watchdog monitor

Applications

• Industrial