NXP MK10DX64VLH7

ARM® Cortex®-M472 МГц64 КБ (64К x 8)

Overview

The MK10DX64VLH7 is a 32-bit Kinetis K1x Baseline Microcontroller based on ARM Cortex-M4 RISC architecture core operates at a maximum frequency of 72MHz. The device incorporates 96kB internal flash, 18kB internal RAM, 2kB EEPROM, two 16-bit SAR A/D converter, one 12-bit D/A converter and 44 general-purpose I/O pins. This device also features communication interfaces like three UART modules, one SPI module, two I2C modules and one I2S module.

Features

• Operating Characteristics

  Voltage range: 1.71 to 3.6 V

  Flash write voltage range: 1.71 to 3.6 V

  Temperature range (ambient): -40 to 105°C

• Performance

  Up to 50 MHz ARM Cortex-M4 core with DSP instructions delivering 1.25 Dhrystone MIPS per MHz

• Memories and memory interfaces
  

  Up to 16 KB RAM

  Up to 128 KB program flash.

  2 KB FlexRAM on FlexMemory devices

  Serial programming interface (EzPort)

  Up to 32 KB FlexNVM on FlexMemory devices

• Clocks
  

  32 kHz crystal oscillator

  3 to 32 MHz crystal oscillator

  Multi-purpose clock generator

• System peripherals

  Multiple low-power modes to provide power optimization based on application requirements

  4-channel DMA controller, supporting up to 41 request sources

  External watchdog monitor

  Software watchdog

  Low-leakage wakeup unit

• Security and integrity modules

  128-bit unique identification (ID) number per chip

  Hardware CRC module to support fast cyclic redundancy checks

• Analog modules

  16-bit SAR ADC

  Two analog comparators (CMP) containing a 6-bit DAC and programmable reference input

  Voltage reference

• Timers

  Periodic interrupt timers

  Programmable delay block

  Eight-channel motor control/general purpose/PWM timer

  Two-channel quadrature decoder/general purpose timer

Applications

• Automotive 

• Personal electronics

• Communications equipment