NXP MK20DX256VLQ10

ARM® Cortex®-M4100 МГц256 КБ (256К x 8)

Overview

MK20DX256VLL10 with pin details, that includes Kinetis K20 Series, they are designed to operate with a MCU Product, Packaging is shown on datasheet note for use in a Tray, that offers Unit Weight features such as 0.024170 oz, Mounting Style is designed to work in SMD/SMT, as well as the 100-LQFP Package Case, it has an Operating Temperature range of -40°C ~ 105°C (TA). In addition, the Supplier Device Package is 100-LQFP (14x14), the device is offered in 66 Number of I O, the device has a 100MHz of Speed, and EEPROM Size is 4K x 8, and the Core Processor is ARMR CortexR-M4, and RAM Size is 64K x 8, and the Program Memory Type is FLASH, and Peripherals is DMA, I2S, LVD, POR, PWM, WDT, and the Connectivity is CAN, EBI/EMI, I2C, IrDA, SD, SPI, UART/USART, USB, USB OTG, and Voltage Supply Vcc Vdd is 1.71 V ~ 3.6 V, and the Core Size is 32-Bit, and Program Memory Size is 256KB (256K x 8), and the Data Converters is A/D 33x16b, D/A 1x12b, and Oscillator Type is Internal, it has an Maximum Operating Temperature range of + 105 C, it has an Minimum Operating Temperature range of - 40 C, and the Operating Supply Voltage is 1.71 V to 3.6 V, and Interface Type is CAN I2C I2S UART USB SDHC SPI, and the Core is ARM Cortex M4, and Processor Series is ARM, and the Data Bus Width is 32 bit, and Maximum Clock Frequency is 100 MHz, and the Number of ADC Channels is 2, and Number of I Os is 66 I/O, and the Data RAM Size is 128 kB, and ADC Resolution is 16 bit, and the Data RAM Type is Flash, and Data ROM Type is EEPROM.

MK20DX256VLK7R with circuit diagram, that includes CAN, EBI/EMI, I2C, IrDA, SPI, UART/USART, USB, USB OTG Connectivity, they are designed to operate with a ARMR CortexR-M4 Core Processor, Core Size is shown on datasheet note for use in a 32-Bit, that offers Data Converters features such as A/D 29x16b, D/A 1x12b, EEPROM Size is designed to work in 2K x 8, as well as the 52 Number of I O, it has an Operating Temperature range of -40°C ~ 105°C (TA). In addition, the Oscillator Type is Internal, the device is offered in 80-LQFP Package Case, the device has a Tape & Reel (TR) Alternate Packaging of Packaging, and Peripherals is DMA, I2S, LVD, POR, PWM, WDT, and the Program Memory Size is 256KB (256K x 8), and Program Memory Type is FLASH, and the RAM Size is 64K x 8, and Series is Kinetis K20, and the Speed is 72MHz, and Supplier Device Package is 80-LQFP (12x12), and the Unit Weight is 0.017320 oz, and Voltage Supply Vcc Vdd is 1.71 V ~ 3.6 V.

Features

• Voltage reference

• Programmable delay block

• ARM Cortex-M4 core with DSP instructions delivering 1.25 Dhrystone MIPS per MHz

• Serial programming interface (EzPort)

• FlexBus external bus interface

• 3 to 32MHz Crystal oscillator, 32kHz crystal oscillator, and multi-purpose clock generator

• Multiple low-power modes to provide power optimization based on application requirements

• Memory protection unit with multi-master protection

• 16-channel DMA controller, supporting up to 63 request sources

• External watchdog monitor

• Software watchdog

• Low-leakage wakeup unit

• Hardware CRC module to support fast cyclic redundancy checks

• 128-bit Unique identification (ID) number per chip

• Low-power hardware touch sensor interface (TSI)

• Programmable gain amplifier (PGA) integrated into each ADC

• Three analog comparators (CMP) containing a 6-bit DAC and programmable reference input

• Periodic interrupt timers and 16-bit Low-power timer

• 8-channel Motor control/general purpose/PWM timer

• Two 2-channel quadrature decoder/general purpose timers

Applications

• Industrial

• Automation & Process Control

• Power Management

• Communications & Networking

• Consumer Electronics