NXP MKL27Z256VFT4

ARM® Cortex®-M0+48 МГц256 КБ (256К x 8)

Overview

MKL27Z128VMP4 with pin details, that includes Kinetis KL2 Series, they are designed to operate with a Tray Packaging, Unit Weight is shown on datasheet note for use in a 0.002286 oz, that offers Mounting Style features such as SMD/SMT, Package Case is designed to work in 64-LFBGA, it has an Operating Temperature range of -40°C ~ 105°C (TA), the device can also be used as 64-MAPBGA (5x5) Supplier Device Package. In addition, the Number of I O is 50, the device is offered in 48MHz Speed, the device has a ARMR CortexR-M0+ of Core Processor, and RAM Size is 32K x 8, and the Program Memory Type is FLASH, and Peripherals is DMA, I2S, LVD, POR, PWM, WDT, and the Connectivity is I2C, SPI, UART/USART, USB, and Voltage Supply Vcc Vdd is 1.71 V ~ 3.6 V, and the Core Size is 32-Bit, and Program Memory Size is 128KB (128K x 8), and the Data Converters is A/D 16x16b, D/A 1x12b, and Oscillator Type is Internal.

MKL27Z256VFM4R with circuit diagram manufactured by NXP / Freescale. is part of the Embedded - Microcontrollers, , and with support for "ARM Microcontrollers - MCU Kinetis L 32-bit MCU, * Microcontroller IC, Kinetis L 32-bit MCU, ARM Cortex-M0+ core, 256KB Flash, 48MHz, USB, QFN 32, ARM Microcontrollers - MCU Kinetis L 32-bit MCU, ARM Cortex-M0+ core, 256KB Flash, 48MHz, USB, QFN 32.

Features

Core Processor

ARM? Cortex?-M0+ core up to 48 MHz

Memories

128/256 KB program flash memory

32 KB SRAM

16 KB ROM with built-in bootloader

32-byte backup register

System

4-channel asynchronous DMA controller

Watchdog

Low-leakage wakeup unit

Two-pin Serial Wire Debug (SWD) programming and debug interface

Micro Trace Buffer

Bit manipulation engine

Interrupt controller

Clocks

48MHz high accuracy (up to 0.5%) internal reference clock

8MHz/2MHz high accuracy (up to 3%) internal reference clock

1KHz reference clock active under all low-power modes (except VLLS0)

32–40KHz and 3–32MHz crystal oscillator

Operating Characteristics

Voltage range: 1.71 to 3.6 V

Flash write voltage range: 1.71 to 3.6 V

Temperature range: –40 to 105 °C

Peripherals

USB full-speed 2.0 device controller supporting the crystal-less operation

One UART module supporting ISO7816, operating up to 1.5 Mbit/s

Two low-power UART modules supporting asynchronous operation in low-power modes

Two I2C modules and I2C0 supporting up to 1Mbit/s

Two 16-bit SPI modules supporting up to 24 Mbit/s

One FlexIO module supporting emulation of additional UART, IrDA, SPI, I2C, I2S, PWM, and other serial modules, etc.

One serial audio interface I2S

One 16-bit 818 ksps ADC module with high accuracy internal voltage reference (Vref) and up to 16 channels

High-speed analog comparator containing a 6-bit DAC for programmable reference input

One 12-bit DAC

1.2 V internal voltage reference

Timers

One 6-channel Timer/PWM module

Two 2-channel Timer/PWM modules

One low-power timer

Periodic interrupt timer

Real-time clock

Security and Integrity

80-bit unique identification number per chip

Advanced flash security

I/O

Up to 50 general-purpose input/output pins (GPIO) and 6 high-drive pad

Low Power

Down to 54uA/MHz in very low power run mode

Down to 1.96uA in VLLS3 mode (RAM + RTC retained)

Six flexible static modes

Applications

• Used in development boards

• Hobby projects

• Drivers

• Industrial control systems

• SMPS and Power Regulation systems

• Analog signal measuring and manipulations

• Embedded systems like coffee machines, vending machine

• Display units