NXP MKL36Z256VLL4

ARM® Cortex®-M0+48 МГц256 КБ (256К x 8)

Overview

The MKL36Z128VMC4 is IC MCU 32BIT 128KB FLASH 121BGA, that includes Kinetis KL3 Series, they are designed to operate with a Tray Packaging, Package Case is shown on datasheet note for use in a 121-LFBGA, it has an Operating Temperature range of -40°C ~ 105°C (TA), Supplier Device Package is designed to work in 121-MAPBGA (8x8), as well as the 84 Number of I O, the device can also be used as 48MHz Speed. In addition, the Core Processor is ARMR CortexR-M0+, the device is offered in 16K x 8 RAM Size, the device has a FLASH of Program Memory Type, and Peripherals is Brown-out Detect/Reset, DMA, I2S, LCD, LVD, POR, PWM, WDT, and the Connectivity is I2C, LIN, SPI, UART/USART, and Voltage Supply Vcc Vdd is 1.71 V ~ 3.6 V, and the Core Size is 32-Bit, and Program Memory Size is 128KB (128K x 8), and the Data Converters is A/D - 16bit, D/A - 12bit, and Oscillator Type is Internal.

MKL36Z128VLL4R with circuit diagram manufactured by NXP / Freescale. is part of the Embedded - Microcontrollers, , and with support for "ARM Microcontrollers - MCU Kinetis L 32-bit MCU, * Microcontroller IC, Kinetis KL36 48MHz Cortex-M0+ Ultra-Low Power MCU, ARM Microcontrollers - MCU Kinetis L 32-bit MCU, ARM Cortex-M0+ core, 128KB Flash, 48MHz, Segment LCD, QFP 100.

Features

? 8-Bit HCS08 Central Processor Unit (CPU)

– Up to 50.33-MHz HCS08 CPU above 2.4V, 40-MHz

CPU above 2.1V, and 20-MHz CPU above 1.8V, across

temperature range

– HC08 instruction set with added BGND instruction

– Support for up to 32 interrupt/reset sources

? On-Chip Memory

– Flash read/program/erase over full operating voltage

and temperature

– Random-access memory (RAM)

– Security circuitry to prevent unauthorized access to

RAM and flash contents

? Power-Saving Modes

– Two low power stop modes; reduced power wait mode

– Peripheral clock enable register can disable clocks to

unused modules, reducing currents; allows clocks to

remain enabled to specific peripherals in stop3 mode

– Very low power external oscillator can be used in stop3

mode to provide accurate clock to active peripherals

– Very low power real time counter for use in run, wait,

and stop modes with internal and external clock sources

– 6 μs typical wake up time from stop modes

? Clock Source Options

– Oscillator (XOSC) — Loop-control Pierce oscillator;

Crystal or ceramic resonator range of 31.25 kHz to

38.4 kHz or 1 MHz to 16 MHz

– Internal Clock Source (ICS) — FLL controlled by

internal or external reference; precision trimming of

internal reference allows 0.2% resolution and 2%

deviation; supports CPU freq. from 2 to 50.33 MHz

? System Protection

– Watchdog computer operating properly (COP) reset

with option to run from dedicated 1-kHz internal clock

source or bus clock

– Low-voltage detection with reset or interrupt; selectable

trip points

– Illegal opcode detection with reset

– Flash block protection

? Development Support

– Single-wire background debug interface

– Breakpoint capability to allow single breakpoint setting

during in-circuit debugging (plus two more breakpoints)

– On-chip in-circuit emulator (ICE) debug module

containing two comparators and nine trigger modes.

Applications

These features make the STM32F105xx and STM32F107xx connectivity line microcontroller family suitable for a wide range of applications such as motor drives and application control, medical and handheld equipment, industrial applications.